INA114BU vs INA116UAG4 Vergleich
Detaillierter Direktvergleich von INA114BU von Texas Instruments und INA116UAG4 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA116UAG4 - 3 fA Input Bias Instrumentation Amplifier | Texas Instruments
INA116UAG4 ObsoleteSpezifikationsvergleich
| Parameter | INA114BU | INA116UAG4 |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Amplifier Type | Precision instrumentation amplifier | Standard general-purpose instrumentation amplifier |
| Architecture | Three-op-amp design | — |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 1 MHz | — |
| Input Offset Voltage | 50 uV | — |
| Input Noise Density | 11 nV/√Hz | — |
| Typical Supply Current | 3 mA | — |
| Gain Range | 1 to 10,000 | 1 to 1000 |
| Gain-Setting Method | One external resistor | — |
| Supply Voltage Range | 2.25 V to 18 V | [DATA_NEEDED: supply voltage range] |
| Input Protection Range | ±40 V | — |
| Slew Rate | 0.06 V/µs | 0.8 V/µs |
| Settling Time | 600 ns | — |
| Betriebstemperaturbereich | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 16-pin SOIC | 16-pin SOIC |
| Montageart | Surface mount | Surface mount |
| Product Type | Low-cost, general-purpose precision instrumentation amplifier | Ultra-low-input-bias-current instrumentation amplifier |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance] |
| Input Bias Current at 25°C | — | 3 fA typical |
| Input Bias Current at 85°C | — | 25 fA typical |
| Gain Setting Method | — | 1 external resistor |
| Internal Topology | — | 3-op-amp instrumentation amplifier |
| Input Stage | — | Monolithic FET input |
| Bandwidth | — | 800 kHz -3 dB |
| Differential Input | — | Yes |
| Input Guarding | — | Special input guarding techniques |
| Package Code | — | UA |
| Temperature Grade | — | Industrial |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Ausgangsspannungsbereich | — | [DATA_NEEDED: output voltage range] |