INA114BU vs INA116UAG4 비교
다음의 상세 나란히 비교: INA114BU 제조: Texas Instruments 및 INA116UAG4 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
INA116UAG4 - 3 fA Input Bias Instrumentation Amplifier | Texas Instruments
INA116UAG4 Obsolete사양 비교
| 파라미터 | INA114BU | INA116UAG4 |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | Obsolete |
| Amplifier Type | Precision instrumentation amplifier | Standard general-purpose instrumentation amplifier |
| Architecture | Three-op-amp design | — |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 1 MHz | — |
| Input Offset Voltage | 50 uV | — |
| Input Noise Density | 11 nV/√Hz | — |
| Typical Supply Current | 3 mA | — |
| Gain Range | 1 to 10,000 | 1 to 1000 |
| Gain-Setting Method | One external resistor | — |
| Supply Voltage Range | 2.25 V to 18 V | [DATA_NEEDED: supply voltage range] |
| Input Protection Range | ±40 V | — |
| Slew Rate | 0.06 V/µs | 0.8 V/µs |
| Settling Time | 600 ns | — |
| 동작 온도 범위 | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| 패키지 | 16-pin SOIC | 16-pin SOIC |
| 실장 유형 | Surface mount | Surface mount |
| Product Type | Low-cost, general-purpose precision instrumentation amplifier | Ultra-low-input-bias-current instrumentation amplifier |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance] |
| Input Bias Current at 25°C | — | 3 fA typical |
| Input Bias Current at 85°C | — | 25 fA typical |
| Gain Setting Method | — | 1 external resistor |
| Internal Topology | — | 3-op-amp instrumentation amplifier |
| Input Stage | — | Monolithic FET input |
| Bandwidth | — | 800 kHz -3 dB |
| Differential Input | — | Yes |
| Input Guarding | — | Special input guarding techniques |
| Package Code | — | UA |
| Temperature Grade | — | Industrial |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input voltage range] |
| 출력 전압 범위 | — | [DATA_NEEDED: output voltage range] |