INA114BU vs INA116UAG4 Comparaison
Comparaison détaillée côte à côte de INA114BU par Texas Instruments et INA116UAG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA116UAG4 - 3 fA Input Bias Instrumentation Amplifier | Texas Instruments
INA116UAG4 ObsoleteComparaison des spécifications
| Paramètre | INA114BU | INA116UAG4 |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Obsolete |
| Amplifier Type | Precision instrumentation amplifier | Standard general-purpose instrumentation amplifier |
| Architecture | Three-op-amp design | — |
| Number of Circuits | 1 circuit | 1 circuit |
| Gain-Bandwidth Product | 1 MHz | — |
| Input Offset Voltage | 50 uV | — |
| Input Noise Density | 11 nV/√Hz | — |
| Typical Supply Current | 3 mA | — |
| Gain Range | 1 to 10,000 | 1 to 1000 |
| Gain-Setting Method | One external resistor | — |
| Supply Voltage Range | 2.25 V to 18 V | [DATA_NEEDED: supply voltage range] |
| Input Protection Range | ±40 V | — |
| Slew Rate | 0.06 V/µs | 0.8 V/µs |
| Settling Time | 600 ns | — |
| Plage de température de fonctionnement | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 16-pin SOIC | 16-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Product Type | Low-cost, general-purpose precision instrumentation amplifier | Ultra-low-input-bias-current instrumentation amplifier |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH compliance] |
| Input Bias Current at 25°C | — | 3 fA typical |
| Input Bias Current at 85°C | — | 25 fA typical |
| Gain Setting Method | — | 1 external resistor |
| Internal Topology | — | 3-op-amp instrumentation amplifier |
| Input Stage | — | Monolithic FET input |
| Bandwidth | — | 800 kHz -3 dB |
| Differential Input | — | Yes |
| Input Guarding | — | Special input guarding techniques |
| Package Code | — | UA |
| Temperature Grade | — | Industrial |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Plage de tension de sortie | — | [DATA_NEEDED: output voltage range] |