INA121P vs AD620ANZ Vergleich
Detaillierter Direktvergleich von INA121P von Texas Instruments und AD620ANZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ AktivAnalog Devices
AD620ANZ - 1-Channel Low-Power Instrumentation Amplifier | Analog Devices
AD620ANZ UnknownSpezifikationsvergleich
| Parameter | INA121P | AD620ANZ |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Unknown |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $5,65 | $6,20 |
| Amplifier Type | Instrumentation Amplifier (3-op-amp topology) | — |
| Number of Channels | 1 | 1 channel |
| Input Type | FET / CMOS | — |
| Input Bias Current | ±4 pA typical | 2 nA |
| Input Offset Voltage | ±200 µV typical | [DATA_NEEDED: input offset voltage] |
| Input Offset Drift | ±2 µV/°C typical | — |
| Input Voltage Noise Density | 20 nV/√Hz at 1 kHz | — |
| Ruhestrom | ±450 µA typical | — |
| Common-Mode Rejection Ratio (CMRR) | 106 dB minimum | — |
| Bandwidth (-3 dB) | 600 kHz at G = 100 | — |
| Nonlinearity Error | 0.001% (G = 10) | — |
| Gain Range | 1 V/V to 10,000 V/V (single external resistor) | 1 to 10,000 |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Input Protection | ±40 V differential and common-mode | — |
| Betriebstemperaturbereich | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 8-Pin PDIP (P) | 8-lead PDIP |
| Montageart | Through-Hole | Through-hole |
| Slew Rate | [DATA_NEEDED: slew rate from datasheet] | — |
| RoHS-Status | Compliant | unknown |
| Lead-Free Finish | Yes (Matte Tin) | — |
| Product Type | — | Low-cost, low-power, high-accuracy instrumentation amplifier |
| External Gain Setting | — | One external resistor |
| Gain-Bandwidth Product | — | 1 MHz |
| Maximum Supply Current | — | 1.3 mA |
| Versorgungsspannung | — | [DATA_NEEDED: supply voltage range] |
| Common-Mode Rejection | — | 110 dB |
| Input Noise | — | [DATA_NEEDED: input noise] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Package Family | — | PDIP family, through-hole DIP |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |
| Applications | — | Precision data acquisition, sensor conditioning, portable instrumentation |