INA121P vs AD620ANZ Comparaison
Comparaison détaillée côte à côte de INA121P par Texas Instruments et AD620ANZ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ ActifAnalog Devices
AD620ANZ - 1-Channel Low-Power Instrumentation Amplifier | Analog Devices
AD620ANZ UnknownComparaison des spécifications
| Paramètre | INA121P | AD620ANZ |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Unknown |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $5,65 | $6,20 |
| Amplifier Type | Instrumentation Amplifier (3-op-amp topology) | — |
| Number of Channels | 1 | 1 channel |
| Input Type | FET / CMOS | — |
| Input Bias Current | ±4 pA typical | 2 nA |
| Input Offset Voltage | ±200 µV typical | [DATA_NEEDED: input offset voltage] |
| Input Offset Drift | ±2 µV/°C typical | — |
| Input Voltage Noise Density | 20 nV/√Hz at 1 kHz | — |
| Courant de repos | ±450 µA typical | — |
| Common-Mode Rejection Ratio (CMRR) | 106 dB minimum | — |
| Bandwidth (-3 dB) | 600 kHz at G = 100 | — |
| Nonlinearity Error | 0.001% (G = 10) | — |
| Gain Range | 1 V/V to 10,000 V/V (single external resistor) | 1 to 10,000 |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Input Protection | ±40 V differential and common-mode | — |
| Plage de température de fonctionnement | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 8-Pin PDIP (P) | 8-lead PDIP |
| Type de montage | Through-Hole | Through-hole |
| Slew Rate | [DATA_NEEDED: slew rate from datasheet] | — |
| Statut RoHS | Compliant | unknown |
| Lead-Free Finish | Yes (Matte Tin) | — |
| Product Type | — | Low-cost, low-power, high-accuracy instrumentation amplifier |
| External Gain Setting | — | One external resistor |
| Gain-Bandwidth Product | — | 1 MHz |
| Maximum Supply Current | — | 1.3 mA |
| Tension d'alimentation | — | [DATA_NEEDED: supply voltage range] |
| Common-Mode Rejection | — | 110 dB |
| Input Noise | — | [DATA_NEEDED: input noise] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Package Family | — | PDIP family, through-hole DIP |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |
| Applications | — | Precision data acquisition, sensor conditioning, portable instrumentation |