INA121P vs AD620ANZ Comparação
Comparação detalhada lado a lado de INA121P por Texas Instruments e AD620ANZ por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ AtivoAnalog Devices
AD620ANZ - 1-Channel Low-Power Instrumentation Amplifier | Analog Devices
AD620ANZ UnknownComparação de especificações
| Parâmetro | INA121P | AD620ANZ |
|---|---|---|
| Marca | Texas Instruments | Analog Devices |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Unknown |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $5,65 | $6,20 |
| Amplifier Type | Instrumentation Amplifier (3-op-amp topology) | — |
| Number of Channels | 1 | 1 channel |
| Input Type | FET / CMOS | — |
| Input Bias Current | ±4 pA typical | 2 nA |
| Input Offset Voltage | ±200 µV typical | [DATA_NEEDED: input offset voltage] |
| Input Offset Drift | ±2 µV/°C typical | — |
| Input Voltage Noise Density | 20 nV/√Hz at 1 kHz | — |
| Corrente de repouso | ±450 µA typical | — |
| Common-Mode Rejection Ratio (CMRR) | 106 dB minimum | — |
| Bandwidth (-3 dB) | 600 kHz at G = 100 | — |
| Nonlinearity Error | 0.001% (G = 10) | — |
| Gain Range | 1 V/V to 10,000 V/V (single external resistor) | 1 to 10,000 |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Input Protection | ±40 V differential and common-mode | — |
| Faixa de temperatura de operação | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Encapsulamento | 8-Pin PDIP (P) | 8-lead PDIP |
| Tipo de montagem | Through-Hole | Through-hole |
| Slew Rate | [DATA_NEEDED: slew rate from datasheet] | — |
| Status RoHS | Compliant | unknown |
| Lead-Free Finish | Yes (Matte Tin) | — |
| Product Type | — | Low-cost, low-power, high-accuracy instrumentation amplifier |
| External Gain Setting | — | One external resistor |
| Gain-Bandwidth Product | — | 1 MHz |
| Maximum Supply Current | — | 1.3 mA |
| Tensão de alimentação | — | [DATA_NEEDED: supply voltage range] |
| Common-Mode Rejection | — | 110 dB |
| Input Noise | — | [DATA_NEEDED: input noise] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Package Family | — | PDIP family, through-hole DIP |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |
| Applications | — | Precision data acquisition, sensor conditioning, portable instrumentation |