INA126P vs INA126PA Vergleich
Detaillierter Direktvergleich von INA126P von Texas Instruments und INA126PA von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | INA126P | INA126PA |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Product Type | Precision micropower instrumentation amplifier | — |
| Architecture | Two-op-amp instrumentation amplifier | Two-operating-amplifier instrumentation amplifier |
| Maximum Supply Voltage | 36 V | 36 V |
| Supply Voltage Range | ±1.35 V to ±18 V | ±1.35 V to ±18 V |
| Ruhestrom | 175 µA/channel typical | 175 µA per channel |
| Input Offset Voltage | 250 µV | 250 µV |
| Programmable Gain | 1, 10, 100, or 1000 using external resistor | — |
| Differential Signal Acquisition | Precision low-noise differential input | — |
| Channel Count | 1 channel | — |
| Gehäuse | 8-pin PDIP | 8-pin PDIP |
| Terminal Count | 8 terminals | — |
| Montageart | Through-hole | Through-hole |
| Package Shape | Rectangular DIP | — |
| Temperature Grade | Industrial | — |
| Application Class | Portable instrumentation and data acquisition | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Device Type | — | Single-channel precision instrumentation amplifier |
| Minimum Total Supply Voltage | — | 2.7 V |
| Gain Range | — | 1 V/V to 1000 V/V |
| Small-Signal Bandwidth | — | 200 kHz |
| Slew Rate | — | 0.04 V/µs |
| Number of Amplifiers | — | 1 circuit |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Gain-Setting Resistance | — | [DATA_NEEDED: gain-setting resistance] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |