INA126P vs INA126PA Perbandingan
Perbandingan bersamaan detil INA126P dari Texas Instruments dan INA126PA dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | INA126P | INA126PA |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Obsolete |
| Product Type | Precision micropower instrumentation amplifier | — |
| Architecture | Two-op-amp instrumentation amplifier | Two-operating-amplifier instrumentation amplifier |
| Maximum Supply Voltage | 36 V | 36 V |
| Supply Voltage Range | ±1.35 V to ±18 V | ±1.35 V to ±18 V |
| Arus Memerintah | 175 µA/channel typical | 175 µA per channel |
| Input Offset Voltage | 250 µV | 250 µV |
| Programmable Gain | 1, 10, 100, or 1000 using external resistor | — |
| Differential Signal Acquisition | Precision low-noise differential input | — |
| Channel Count | 1 channel | — |
| Paket | 8-pin PDIP | 8-pin PDIP |
| Terminal Count | 8 terminals | — |
| Tipe Mounting | Through-hole | Through-hole |
| Package Shape | Rectangular DIP | — |
| Temperature Grade | Industrial | — |
| Application Class | Portable instrumentation and data acquisition | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Device Type | — | Single-channel precision instrumentation amplifier |
| Minimum Total Supply Voltage | — | 2.7 V |
| Gain Range | — | 1 V/V to 1000 V/V |
| Small-Signal Bandwidth | — | 200 kHz |
| Slew Rate | — | 0.04 V/µs |
| Number of Amplifiers | — | 1 circuit |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Gain-Setting Resistance | — | [DATA_NEEDED: gain-setting resistance] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |