INA126P vs INA126PA Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA126P tarafından Texas Instruments ve INA126PA tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | INA126P | INA126PA |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Obsolete |
| Product Type | Precision micropower instrumentation amplifier | — |
| Architecture | Two-op-amp instrumentation amplifier | Two-operating-amplifier instrumentation amplifier |
| Maximum Supply Voltage | 36 V | 36 V |
| Supply Voltage Range | ±1.35 V to ±18 V | ±1.35 V to ±18 V |
| Durağan Akım | 175 µA/channel typical | 175 µA per channel |
| Input Offset Voltage | 250 µV | 250 µV |
| Programmable Gain | 1, 10, 100, or 1000 using external resistor | — |
| Differential Signal Acquisition | Precision low-noise differential input | — |
| Channel Count | 1 channel | — |
| Paket | 8-pin PDIP | 8-pin PDIP |
| Terminal Count | 8 terminals | — |
| Montaj Türü | Through-hole | Through-hole |
| Package Shape | Rectangular DIP | — |
| Temperature Grade | Industrial | — |
| Application Class | Portable instrumentation and data acquisition | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Device Type | — | Single-channel precision instrumentation amplifier |
| Minimum Total Supply Voltage | — | 2.7 V |
| Gain Range | — | 1 V/V to 1000 V/V |
| Small-Signal Bandwidth | — | 200 kHz |
| Slew Rate | — | 0.04 V/µs |
| Number of Amplifiers | — | 1 circuit |
| İşletim Sıcaklığı Aralığı | — | [DATA_NEEDED: operating temperature range] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Gain-Setting Resistance | — | [DATA_NEEDED: gain-setting resistance] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |