INA126U vs INA122UA Vergleich
Detaillierter Direktvergleich von INA126U von Texas Instruments und INA122UA von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA122UA - 36V Micropower Instrumentation Amplifier | Texas Instruments
INA122UA ✓ AktivSpezifikationsvergleich
| Parameter | INA126U | INA122UA |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Device Type | Single-circuit micropower precision instrumentation amplifier | — |
| Maximum Total Supply Voltage | 36 V | — |
| Operating Supply Range | ±1.35 V to ±18 V | — |
| Ruhestrom | 175 µA per channel | 60 uA |
| Offset Voltage | 250 µV | — |
| Architecture | Two-op-amp design | Two-op-amp design |
| Circuit Count | 1 amplifier | — |
| Signal Type | Differential signal acquisition | — |
| Gain Configuration | External gain-setting resistor | — |
| Gehäuse | 8-pin SOIC, 3.90 mm width | 8-pin SOIC |
| Montageart | Surface mount | Surface mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | 120 kHz |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | Approximately 0.1 V below the negative supply |
| Maximum Differential Input Voltage | [DATA_NEEDED: maximum differential input voltage] | — |
| Noise Voltage Density | [DATA_NEEDED: noise voltage density] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Product Type | — | Precision instrumentation amplifier |
| Number of Channels | — | 1 circuit |
| Single-Supply Voltage Range | — | 2.2 V to 36 V |
| Dual-Supply Voltage Range | — | +/-18 V |
| Output Swing | — | Rail-to-rail |
| Maximum Offset Voltage | — | 250 uV |
| Maximum Offset Drift | — | 3 uV/degree Celsius |
| Noise | — | [DATA_NEEDED: noise specification] |
| Gain Range | — | [DATA_NEEDED: programmable gain range] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |
| Input Impedance | — | [DATA_NEEDED: input impedance] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |