INA126U vs INA122UA Comparaison
Comparaison détaillée côte à côte de INA126U par Texas Instruments et INA122UA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
INA122UA - 36V Micropower Instrumentation Amplifier | Texas Instruments
INA122UA ✓ ActifComparaison des spécifications
| Paramètre | INA126U | INA122UA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Device Type | Single-circuit micropower precision instrumentation amplifier | — |
| Maximum Total Supply Voltage | 36 V | — |
| Operating Supply Range | ±1.35 V to ±18 V | — |
| Courant de repos | 175 µA per channel | 60 uA |
| Offset Voltage | 250 µV | — |
| Architecture | Two-op-amp design | Two-op-amp design |
| Circuit Count | 1 amplifier | — |
| Signal Type | Differential signal acquisition | — |
| Gain Configuration | External gain-setting resistor | — |
| Boîtier | 8-pin SOIC, 3.90 mm width | 8-pin SOIC |
| Type de montage | Surface mount | Surface mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | 120 kHz |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | Approximately 0.1 V below the negative supply |
| Maximum Differential Input Voltage | [DATA_NEEDED: maximum differential input voltage] | — |
| Noise Voltage Density | [DATA_NEEDED: noise voltage density] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Product Type | — | Precision instrumentation amplifier |
| Number of Channels | — | 1 circuit |
| Single-Supply Voltage Range | — | 2.2 V to 36 V |
| Dual-Supply Voltage Range | — | +/-18 V |
| Output Swing | — | Rail-to-rail |
| Maximum Offset Voltage | — | 250 uV |
| Maximum Offset Drift | — | 3 uV/degree Celsius |
| Noise | — | [DATA_NEEDED: noise specification] |
| Gain Range | — | [DATA_NEEDED: programmable gain range] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |
| Input Impedance | — | [DATA_NEEDED: input impedance] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |