INA126U vs INA122UA Comparación
Comparación detallada lado a lado de INA126U por Texas Instruments y INA122UA por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
INA122UA - 36V Micropower Instrumentation Amplifier | Texas Instruments
INA122UA ✓ ActivoComparación de especificaciones
| Parámetro | INA126U | INA122UA |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Device Type | Single-circuit micropower precision instrumentation amplifier | — |
| Maximum Total Supply Voltage | 36 V | — |
| Operating Supply Range | ±1.35 V to ±18 V | — |
| Corriente en reposo | 175 µA per channel | 60 uA |
| Offset Voltage | 250 µV | — |
| Architecture | Two-op-amp design | Two-op-amp design |
| Circuit Count | 1 amplifier | — |
| Signal Type | Differential signal acquisition | — |
| Gain Configuration | External gain-setting resistor | — |
| Encapsulado | 8-pin SOIC, 3.90 mm width | 8-pin SOIC |
| Tipo de montaje | Surface mount | Surface mount |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gain-Bandwidth Product | [DATA_NEEDED: gain-bandwidth product] | 120 kHz |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | Approximately 0.1 V below the negative supply |
| Maximum Differential Input Voltage | [DATA_NEEDED: maximum differential input voltage] | — |
| Noise Voltage Density | [DATA_NEEDED: noise voltage density] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Product Type | — | Precision instrumentation amplifier |
| Number of Channels | — | 1 circuit |
| Single-Supply Voltage Range | — | 2.2 V to 36 V |
| Dual-Supply Voltage Range | — | +/-18 V |
| Output Swing | — | Rail-to-rail |
| Maximum Offset Voltage | — | 250 uV |
| Maximum Offset Drift | — | 3 uV/degree Celsius |
| Noise | — | [DATA_NEEDED: noise specification] |
| Gain Range | — | [DATA_NEEDED: programmable gain range] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |
| Input Impedance | — | [DATA_NEEDED: input impedance] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |