INA128P vs INA128PA Vergleich
Detaillierter Direktvergleich von INA128P von Texas Instruments und INA128PA von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | INA128P | INA128PA |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier |
| Common-Mode Rejection Ratio | 130 dB minimum | 130 dB |
| Offset Voltage | 50 µV maximum | — |
| Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | — |
| Input Protection | ±40 V | ±40 V |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Ruhestrom | 700 µA | 700 µA |
| Bandwidth | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Slew Rate | 4 V/µs | — |
| Gehäuse | 8-pin plastic DIP (PDIP) | 8-pin PDIP |
| Betriebstemperatur | -40 °C to +85 °C | -40°C to +85°C |
| Input Type | Differential input | — |
| Manufacturer | Texas Instruments | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Circuits | — | 1 circuit |
| Minimum Common-Mode Rejection | — | 120 dB |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Voltage Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Supply Range | — | Up to ±18 V |
| Gain Range | — | 1 to 10,000 |
| Gain Setting | — | Single external resistor |
| Green Product | — | Yes |
| Restricted Substances | — | No Sb/Br |
| Montageart | — | Through-hole |