INA128P vs INA128PA Comparación
Comparación detallada lado a lado de INA128P por Texas Instruments y INA128PA por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | INA128P | INA128PA |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier |
| Common-Mode Rejection Ratio | 130 dB minimum | 130 dB |
| Offset Voltage | 50 µV maximum | — |
| Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | — |
| Input Protection | ±40 V | ±40 V |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Corriente en reposo | 700 µA | 700 µA |
| Bandwidth | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Slew Rate | 4 V/µs | — |
| Encapsulado | 8-pin plastic DIP (PDIP) | 8-pin PDIP |
| Temperatura de funcionamiento | -40 °C to +85 °C | -40°C to +85°C |
| Input Type | Differential input | — |
| Manufacturer | Texas Instruments | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Circuits | — | 1 circuit |
| Minimum Common-Mode Rejection | — | 120 dB |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Voltage Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Supply Range | — | Up to ±18 V |
| Gain Range | — | 1 to 10,000 |
| Gain Setting | — | Single external resistor |
| Green Product | — | Yes |
| Restricted Substances | — | No Sb/Br |
| Tipo de montaje | — | Through-hole |