INA128P vs INA128PA Comparaison
Comparaison détaillée côte à côte de INA128P par Texas Instruments et INA128PA par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | INA128P | INA128PA |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier |
| Common-Mode Rejection Ratio | 130 dB minimum | 130 dB |
| Offset Voltage | 50 µV maximum | — |
| Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | — |
| Input Protection | ±40 V | ±40 V |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Courant de repos | 700 µA | 700 µA |
| Bandwidth | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Slew Rate | 4 V/µs | — |
| Boîtier | 8-pin plastic DIP (PDIP) | 8-pin PDIP |
| Température de fonctionnement | -40 °C to +85 °C | -40°C to +85°C |
| Input Type | Differential input | — |
| Manufacturer | Texas Instruments | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Circuits | — | 1 circuit |
| Minimum Common-Mode Rejection | — | 120 dB |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Voltage Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Supply Range | — | Up to ±18 V |
| Gain Range | — | 1 to 10,000 |
| Gain Setting | — | Single external resistor |
| Green Product | — | Yes |
| Restricted Substances | — | No Sb/Br |
| Type de montage | — | Through-hole |