INA128PA vs INA141P Vergleich
Detaillierter Direktvergleich von INA128PA von Texas Instruments und INA141P von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA141P - Precision G=10/100 Low-Power Amplifier | Texas Instruments
INA141P UnknownSpezifikationsvergleich
| Parameter | INA128PA | INA141P |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Unknown |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation-amplifier design |
| Number of Circuits | 1 circuit | — |
| Gehäuse | 8-pin PDIP | 8-pin plastic DIP |
| Common-Mode Rejection Ratio | 130 dB | — |
| Minimum Common-Mode Rejection | 120 dB | 117 dB |
| Ruhestrom | 700 µA | — |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Voltage Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Input Protection | ±40 V | ±40 V |
| Supply Range | Up to ±18 V | ±18 V |
| Gain Range | 1 to 10,000 | — |
| Gain Setting | Single external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Green Product | Yes | — |
| Restricted Substances | No Sb/Br | — |
| Betriebstemperatur | -40°C to +85°C | — |
| Montageart | Through-hole | Through-hole |
| Device Type | — | Precision, low-power instrumentation amplifier |
| Available Gain Settings | — | 10 and 100 V/V |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Offset Drift | — | 0.5 µV/°C |
| Betriebstemperaturbereich | — | -40 °C to +85 °C |
| Package Pin Count | — | 8 pins |
| Low-Power Supply Current | — | [DATA_NEEDED: maximum quiescent current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Noise | — | [DATA_NEEDED: input noise specification] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| RoHS-Status | — | unknown |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | [DATA_NEEDED: automotive qualification status] |