INA128PA vs INA141P 比較

詳細並排比較 INA128PA 由 Texas Instruments 與 INA141P 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Texas Instruments
INA128PA INA128PA - 130dB CMRR Low-Power INA | Texas Instruments

INA128PA - 130dB CMRR Low-Power INA | Texas Instruments

INA128PA ✓ 啟用中

規格比較

參數 INA128PA INA141P
品牌 Texas Instruments Texas Instruments
類別 Amplifier ICs Amplifier ICs
生命週期狀態 啟用中 Unknown
Product Type Precision instrumentation amplifier —
Architecture Three-op-amp instrumentation amplifier Three-op-amp instrumentation-amplifier design
Number of Circuits 1 circuit —
封裝 8-pin PDIP 8-pin plastic DIP
Common-Mode Rejection Ratio 130 dB —
Minimum Common-Mode Rejection 120 dB 117 dB
靜態電流 700 µA —
Maximum Input Offset Voltage 50 µV —
Maximum Input Voltage Drift 0.5 µV/°C —
Maximum Input Bias Current 5 nA 5 nA
Input Protection ±40 V ±40 V
Supply Range Up to ±18 V ±18 V
Gain Range 1 to 10,000 —
Gain Setting Single external resistor —
Bandwidth at Gain 100 200 kHz 200 kHz
Green Product Yes —
Restricted Substances No Sb/Br —
工作溫度 -40°C to +85°C —
安裝類型 Through-hole Through-hole
Device Type — Precision, low-power instrumentation amplifier
Available Gain Settings — 10 and 100 V/V
Maximum Offset Voltage — 50 µV
Maximum Offset Drift — 0.5 µV/°C
工作溫度範圍 — -40 °C to +85 °C
Package Pin Count — 8 pins
Low-Power Supply Current — [DATA_NEEDED: maximum quiescent current]
Input Common-Mode Range — [DATA_NEEDED: input common-mode voltage range]
Output Voltage Swing — [DATA_NEEDED: output voltage swing]
Input Noise — [DATA_NEEDED: input noise specification]
Gain Error — [DATA_NEEDED: gain error]
RoHS 狀態 — unknown
REACH Status — unknown
AEC-Q100 Qualification — [DATA_NEEDED: automotive qualification status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價