INA128PA vs INA141P Comparación
Comparación detallada lado a lado de INA128PA por Texas Instruments y INA141P por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
INA141P - Precision G=10/100 Low-Power Amplifier | Texas Instruments
INA141P UnknownComparación de especificaciones
| Parámetro | INA128PA | INA141P |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Unknown |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation-amplifier design |
| Number of Circuits | 1 circuit | — |
| Encapsulado | 8-pin PDIP | 8-pin plastic DIP |
| Common-Mode Rejection Ratio | 130 dB | — |
| Minimum Common-Mode Rejection | 120 dB | 117 dB |
| Corriente en reposo | 700 µA | — |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Voltage Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | 5 nA |
| Input Protection | ±40 V | ±40 V |
| Supply Range | Up to ±18 V | ±18 V |
| Gain Range | 1 to 10,000 | — |
| Gain Setting | Single external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Green Product | Yes | — |
| Restricted Substances | No Sb/Br | — |
| Temperatura de funcionamiento | -40°C to +85°C | — |
| Tipo de montaje | Through-hole | Through-hole |
| Device Type | — | Precision, low-power instrumentation amplifier |
| Available Gain Settings | — | 10 and 100 V/V |
| Maximum Offset Voltage | — | 50 µV |
| Maximum Offset Drift | — | 0.5 µV/°C |
| Rango de temperatura de funcionamiento | — | -40 °C to +85 °C |
| Package Pin Count | — | 8 pins |
| Low-Power Supply Current | — | [DATA_NEEDED: maximum quiescent current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Noise | — | [DATA_NEEDED: input noise specification] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| Estado RoHS | — | unknown |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | [DATA_NEEDED: automotive qualification status] |