IR2130STRPBF vs IR2132STRPBF Vergleich
Detaillierter Direktvergleich von IR2130STRPBF von Infineon und IR2132STRPBF von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | IR2130STRPBF | IR2132STRPBF |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,85 | $4,95 |
| Configuration | 3-Phase Bridge (6 channel: 3 high-side + 3 low-side) | 3-Phase Bridge |
| Input Logic Type | Inverting | — |
| Anzahl der Ausgänge | 6 (3 high-side referenced, 3 low-side referenced) | — |
| High-Side Offset Voltage (V_B) | Up to +600 V | — |
| Gate Drive Supply Voltage (VCC) | 10 V to 20 V | 10 V to 20 V |
| Logic Supply Voltage (VDD) | 2.5 V logic compatible (CMOS/LSTTL) | — |
| Source Current (typ.) | 0.25 A | — |
| Sink Current (typ.) | 0.5 A | — |
| Peak Output Current | 200 mA (datasheet 3-phase driver figure) | — |
| Propagation Delay (typ.) | 675 ns | — |
| Dead-Time (typ.) | 2.5 us (IR2130) | — |
| Undervoltage Lockout | Yes (all 6 channels) | — |
| Over-Current Shutdown | Yes (turns off all 6 drivers, FAULT output) | — |
| Integrated Current-Sense Op-Amp | Yes (ground-referenced) | — |
| dV/dt Immunity | Yes (tolerant to negative transient voltage on phase node) | Yes (negative transient tolerant) |
| Betriebstemperaturbereich | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 28-SOIC Wide-Body (SOIC-28WB, 0.295" / 7.50 mm width) | 28-SOICWB (0.295 inch / 7.50 mm width) |
| Montageart | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (TR) | — |
| Lead-Free / RoHS | Yes (PbF suffix indicates lead-free) | — |
| Driver Type | — | Half-Bridge Gate Driver, Inverting Input |
| Number of Drivers | — | 6 (3 high-side + 3 low-side) |
| Offset Voltage (Max) | — | 600 V |
| Source Current (Typ.) | — | 250 mA |
| Sink Current (Typ.) | — | 500 mA |
| Propagation Delay (Typ.) | — | 675 ns |
| Internal Dead-Time (Typ.) | — | 0.8 µs |
| Input Logic | — | Inverting (HIN/LIN active-low) |
| Bootstrap Architecture | — | Yes (floating high-side channel) |
| Undervoltage Lockout (UVLO) | — | Yes, on all channels |
| Over-Current Protection | — | Yes, with ITRIP input and FAULT output |
| Integrated Op-Amp | — | Yes (current-sense amplifier) |
| Fault Output | — | Yes, active-low latched FAULT pin |
| RoHS-Status | — | Compliant (PBF suffix) |