IR2130STRPBF vs IR2132STRPBF Comparação
Comparação detalhada lado a lado de IR2130STRPBF por Infineon e IR2132STRPBF por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | IR2130STRPBF | IR2132STRPBF |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $2,85 | $4,95 |
| Configuration | 3-Phase Bridge (6 channel: 3 high-side + 3 low-side) | 3-Phase Bridge |
| Input Logic Type | Inverting | — |
| Número de saídas | 6 (3 high-side referenced, 3 low-side referenced) | — |
| High-Side Offset Voltage (V_B) | Up to +600 V | — |
| Gate Drive Supply Voltage (VCC) | 10 V to 20 V | 10 V to 20 V |
| Logic Supply Voltage (VDD) | 2.5 V logic compatible (CMOS/LSTTL) | — |
| Source Current (typ.) | 0.25 A | — |
| Sink Current (typ.) | 0.5 A | — |
| Peak Output Current | 200 mA (datasheet 3-phase driver figure) | — |
| Propagation Delay (typ.) | 675 ns | — |
| Dead-Time (typ.) | 2.5 us (IR2130) | — |
| Undervoltage Lockout | Yes (all 6 channels) | — |
| Over-Current Shutdown | Yes (turns off all 6 drivers, FAULT output) | — |
| Integrated Current-Sense Op-Amp | Yes (ground-referenced) | — |
| dV/dt Immunity | Yes (tolerant to negative transient voltage on phase node) | Yes (negative transient tolerant) |
| Faixa de temperatura de operação | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| Encapsulamento | 28-SOIC Wide-Body (SOIC-28WB, 0.295" / 7.50 mm width) | 28-SOICWB (0.295 inch / 7.50 mm width) |
| Tipo de montagem | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (TR) | — |
| Lead-Free / RoHS | Yes (PbF suffix indicates lead-free) | — |
| Driver Type | — | Half-Bridge Gate Driver, Inverting Input |
| Number of Drivers | — | 6 (3 high-side + 3 low-side) |
| Offset Voltage (Max) | — | 600 V |
| Source Current (Typ.) | — | 250 mA |
| Sink Current (Typ.) | — | 500 mA |
| Propagation Delay (Typ.) | — | 675 ns |
| Internal Dead-Time (Typ.) | — | 0.8 µs |
| Input Logic | — | Inverting (HIN/LIN active-low) |
| Bootstrap Architecture | — | Yes (floating high-side channel) |
| Undervoltage Lockout (UVLO) | — | Yes, on all channels |
| Over-Current Protection | — | Yes, with ITRIP input and FAULT output |
| Integrated Op-Amp | — | Yes (current-sense amplifier) |
| Fault Output | — | Yes, active-low latched FAULT pin |
| Status RoHS | — | Compliant (PBF suffix) |