IR2130STRPBF vs IR2132STRPBF Comparaison
Comparaison détaillée côte à côte de IR2130STRPBF par Infineon et IR2132STRPBF par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | IR2130STRPBF | IR2132STRPBF |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,85 | $4,95 |
| Configuration | 3-Phase Bridge (6 channel: 3 high-side + 3 low-side) | 3-Phase Bridge |
| Input Logic Type | Inverting | — |
| Nombre de sorties | 6 (3 high-side referenced, 3 low-side referenced) | — |
| High-Side Offset Voltage (V_B) | Up to +600 V | — |
| Gate Drive Supply Voltage (VCC) | 10 V to 20 V | 10 V to 20 V |
| Logic Supply Voltage (VDD) | 2.5 V logic compatible (CMOS/LSTTL) | — |
| Source Current (typ.) | 0.25 A | — |
| Sink Current (typ.) | 0.5 A | — |
| Peak Output Current | 200 mA (datasheet 3-phase driver figure) | — |
| Propagation Delay (typ.) | 675 ns | — |
| Dead-Time (typ.) | 2.5 us (IR2130) | — |
| Undervoltage Lockout | Yes (all 6 channels) | — |
| Over-Current Shutdown | Yes (turns off all 6 drivers, FAULT output) | — |
| Integrated Current-Sense Op-Amp | Yes (ground-referenced) | — |
| dV/dt Immunity | Yes (tolerant to negative transient voltage on phase node) | Yes (negative transient tolerant) |
| Plage de température de fonctionnement | -40C to +125C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 28-SOIC Wide-Body (SOIC-28WB, 0.295" / 7.50 mm width) | 28-SOICWB (0.295 inch / 7.50 mm width) |
| Type de montage | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (TR) | — |
| Lead-Free / RoHS | Yes (PbF suffix indicates lead-free) | — |
| Driver Type | — | Half-Bridge Gate Driver, Inverting Input |
| Number of Drivers | — | 6 (3 high-side + 3 low-side) |
| Offset Voltage (Max) | — | 600 V |
| Source Current (Typ.) | — | 250 mA |
| Sink Current (Typ.) | — | 500 mA |
| Propagation Delay (Typ.) | — | 675 ns |
| Internal Dead-Time (Typ.) | — | 0.8 µs |
| Input Logic | — | Inverting (HIN/LIN active-low) |
| Bootstrap Architecture | — | Yes (floating high-side channel) |
| Undervoltage Lockout (UVLO) | — | Yes, on all channels |
| Over-Current Protection | — | Yes, with ITRIP input and FAULT output |
| Integrated Op-Amp | — | Yes (current-sense amplifier) |
| Fault Output | — | Yes, active-low latched FAULT pin |
| Statut RoHS | — | Compliant (PBF suffix) |