IR2132STRPBF vs IR2130STRPBF Vergleich
Detaillierter Direktvergleich von IR2132STRPBF von Infineon und IR2130STRPBF von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | IR2132STRPBF | IR2130STRPBF |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,95 | $2,85 |
| Configuration | 3-Phase Bridge | 3-Phase Bridge (6 channel: 3 high-side + 3 low-side) |
| Driver Type | Half-Bridge Gate Driver, Inverting Input | — |
| Number of Drivers | 6 (3 high-side + 3 low-side) | — |
| Offset Voltage (Max) | 600 V | — |
| Gate Drive Supply Voltage (VCC) | 10 V to 20 V | 10 V to 20 V |
| Source Current (Typ.) | 250 mA | — |
| Sink Current (Typ.) | 500 mA | — |
| Propagation Delay (Typ.) | 675 ns | — |
| Internal Dead-Time (Typ.) | 0.8 µs | — |
| Input Logic | Inverting (HIN/LIN active-low) | — |
| Bootstrap Architecture | Yes (floating high-side channel) | — |
| Undervoltage Lockout (UVLO) | Yes, on all channels | — |
| Over-Current Protection | Yes, with ITRIP input and FAULT output | — |
| Integrated Op-Amp | Yes (current-sense amplifier) | — |
| Fault Output | Yes, active-low latched FAULT pin | — |
| dV/dt Immunity | Yes (negative transient tolerant) | Yes (tolerant to negative transient voltage on phase node) |
| Gehäuse | 28-SOICWB (0.295 inch / 7.50 mm width) | 28-SOIC Wide-Body (SOIC-28WB, 0.295" / 7.50 mm width) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40C to +125C |
| RoHS-Status | Compliant (PBF suffix) | — |
| Input Logic Type | — | Inverting |
| Anzahl der Ausgänge | — | 6 (3 high-side referenced, 3 low-side referenced) |
| High-Side Offset Voltage (V_B) | — | Up to +600 V |
| Logic Supply Voltage (VDD) | — | 2.5 V logic compatible (CMOS/LSTTL) |
| Source Current (typ.) | — | 0.25 A |
| Sink Current (typ.) | — | 0.5 A |
| Peak Output Current | — | 200 mA (datasheet 3-phase driver figure) |
| Propagation Delay (typ.) | — | 675 ns |
| Dead-Time (typ.) | — | 2.5 us (IR2130) |
| Undervoltage Lockout | — | Yes (all 6 channels) |
| Over-Current Shutdown | — | Yes (turns off all 6 drivers, FAULT output) |
| Integrated Current-Sense Op-Amp | — | Yes (ground-referenced) |
| Packaging | — | Tape & Reel (TR) |
| Lead-Free / RoHS | — | Yes (PbF suffix indicates lead-free) |