IR2132STRPBF vs IR2130STRPBF Comparación
Comparación detallada lado a lado de IR2132STRPBF por Infineon y IR2130STRPBF por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | IR2132STRPBF | IR2130STRPBF |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $4,95 | $2,85 |
| Configuration | 3-Phase Bridge | 3-Phase Bridge (6 channel: 3 high-side + 3 low-side) |
| Driver Type | Half-Bridge Gate Driver, Inverting Input | — |
| Number of Drivers | 6 (3 high-side + 3 low-side) | — |
| Offset Voltage (Max) | 600 V | — |
| Gate Drive Supply Voltage (VCC) | 10 V to 20 V | 10 V to 20 V |
| Source Current (Typ.) | 250 mA | — |
| Sink Current (Typ.) | 500 mA | — |
| Propagation Delay (Typ.) | 675 ns | — |
| Internal Dead-Time (Typ.) | 0.8 µs | — |
| Input Logic | Inverting (HIN/LIN active-low) | — |
| Bootstrap Architecture | Yes (floating high-side channel) | — |
| Undervoltage Lockout (UVLO) | Yes, on all channels | — |
| Over-Current Protection | Yes, with ITRIP input and FAULT output | — |
| Integrated Op-Amp | Yes (current-sense amplifier) | — |
| Fault Output | Yes, active-low latched FAULT pin | — |
| dV/dt Immunity | Yes (negative transient tolerant) | Yes (tolerant to negative transient voltage on phase node) |
| Encapsulado | 28-SOICWB (0.295 inch / 7.50 mm width) | 28-SOIC Wide-Body (SOIC-28WB, 0.295" / 7.50 mm width) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | -40C to +125C |
| Estado RoHS | Compliant (PBF suffix) | — |
| Input Logic Type | — | Inverting |
| Número de salidas | — | 6 (3 high-side referenced, 3 low-side referenced) |
| High-Side Offset Voltage (V_B) | — | Up to +600 V |
| Logic Supply Voltage (VDD) | — | 2.5 V logic compatible (CMOS/LSTTL) |
| Source Current (typ.) | — | 0.25 A |
| Sink Current (typ.) | — | 0.5 A |
| Peak Output Current | — | 200 mA (datasheet 3-phase driver figure) |
| Propagation Delay (typ.) | — | 675 ns |
| Dead-Time (typ.) | — | 2.5 us (IR2130) |
| Undervoltage Lockout | — | Yes (all 6 channels) |
| Over-Current Shutdown | — | Yes (turns off all 6 drivers, FAULT output) |
| Integrated Current-Sense Op-Amp | — | Yes (ground-referenced) |
| Packaging | — | Tape & Reel (TR) |
| Lead-Free / RoHS | — | Yes (PbF suffix indicates lead-free) |