IR2132STRPBF vs IR2130STRPBF Comparaison
Comparaison détaillée côte à côte de IR2132STRPBF par Infineon et IR2130STRPBF par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | IR2132STRPBF | IR2130STRPBF |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,95 | $2,85 |
| Configuration | 3-Phase Bridge | 3-Phase Bridge (6 channel: 3 high-side + 3 low-side) |
| Driver Type | Half-Bridge Gate Driver, Inverting Input | — |
| Number of Drivers | 6 (3 high-side + 3 low-side) | — |
| Offset Voltage (Max) | 600 V | — |
| Gate Drive Supply Voltage (VCC) | 10 V to 20 V | 10 V to 20 V |
| Source Current (Typ.) | 250 mA | — |
| Sink Current (Typ.) | 500 mA | — |
| Propagation Delay (Typ.) | 675 ns | — |
| Internal Dead-Time (Typ.) | 0.8 µs | — |
| Input Logic | Inverting (HIN/LIN active-low) | — |
| Bootstrap Architecture | Yes (floating high-side channel) | — |
| Undervoltage Lockout (UVLO) | Yes, on all channels | — |
| Over-Current Protection | Yes, with ITRIP input and FAULT output | — |
| Integrated Op-Amp | Yes (current-sense amplifier) | — |
| Fault Output | Yes, active-low latched FAULT pin | — |
| dV/dt Immunity | Yes (negative transient tolerant) | Yes (tolerant to negative transient voltage on phase node) |
| Boîtier | 28-SOICWB (0.295 inch / 7.50 mm width) | 28-SOIC Wide-Body (SOIC-28WB, 0.295" / 7.50 mm width) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40C to +125C |
| Statut RoHS | Compliant (PBF suffix) | — |
| Input Logic Type | — | Inverting |
| Nombre de sorties | — | 6 (3 high-side referenced, 3 low-side referenced) |
| High-Side Offset Voltage (V_B) | — | Up to +600 V |
| Logic Supply Voltage (VDD) | — | 2.5 V logic compatible (CMOS/LSTTL) |
| Source Current (typ.) | — | 0.25 A |
| Sink Current (typ.) | — | 0.5 A |
| Peak Output Current | — | 200 mA (datasheet 3-phase driver figure) |
| Propagation Delay (typ.) | — | 675 ns |
| Dead-Time (typ.) | — | 2.5 us (IR2130) |
| Undervoltage Lockout | — | Yes (all 6 channels) |
| Over-Current Shutdown | — | Yes (turns off all 6 drivers, FAULT output) |
| Integrated Current-Sense Op-Amp | — | Yes (ground-referenced) |
| Packaging | — | Tape & Reel (TR) |
| Lead-Free / RoHS | — | Yes (PbF suffix indicates lead-free) |