ISP752TFUMA1 vs BTG70902EPLXUMA1 Vergleich
Detaillierter Direktvergleich von ISP752TFUMA1 von Infineon und BTG70902EPLXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ AktivSpezifikationsvergleich
| Parameter | ISP752TFUMA1 | BTG70902EPLXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,02 | $0,99 |
| Product Type | Smart High-Side Power Switch | — |
| Series | PROFET™ Industrial | — |
| Switch Configuration | 1:1 (Single channel) | — |
| Ausgangskonfiguration | High-Side | N-Channel High-Side |
| Ausgangstyp | N-Channel | — |
| On-Resistance (Ron) | 200 mOhm | — |
| Continuous Load Current | 1.3 A | 2 A |
| Betriebsversorgungsspannung | 6 V to 52 V | — |
| Input Type | Non-Inverting (logic-level) | — |
| Betriebstemperatur | -30 C to +85 C | — |
| Gehäuse / Bauform | PG-DSO-8-24 (DSO-8 with exposed pad) | — |
| Montageart | Surface Mount | Surface Mount |
| Fault Protection | Overcurrent; Short-Circuit; Overtemperature; Overvoltage (load-dump); Reverse voltage | — |
| Diagnostic Output | Status flag | DEN pin (current sense / fault flag) |
| RoHS-Status | Compliant | Compliant |
| Product Family | — | PROFET+2 12V |
| Funktion | — | Smart High-Side Power Switch |
| Number of Channels | — | 1 |
| Input-to-Output Ratio | — | 1:1 |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| Operating Voltage Range | — | [DATA_NEEDED: Vbb operating range min/max] |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Rdson typ/max in mohm] |
| Strombegrenzung | — | Fixed (value not specified in retrieved data) |
| Protection Features | — | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Enable Input | — | IN pin (active-high) |
| Channel Select | — | DSEL pin |
| Slew Rate Control | — | Yes (internal, for EMI) |
| Gehäuse | — | PG-TSDSO-14 (exposed pad) |
| Betriebs-Sperrschichttemperatur | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 (PROFET+2 family targeted at automotive) |
| MSL-Level | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |