ISP752TFUMA1 vs BTG70902EPLXUMA1 Comparación
Comparación detallada lado a lado de ISP752TFUMA1 por Infineon y BTG70902EPLXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ ActivoComparación de especificaciones
| Parámetro | ISP752TFUMA1 | BTG70902EPLXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,02 | $0,99 |
| Product Type | Smart High-Side Power Switch | — |
| Series | PROFET™ Industrial | — |
| Switch Configuration | 1:1 (Single channel) | — |
| Configuración de salida | High-Side | N-Channel High-Side |
| Tipo de salida | N-Channel | — |
| On-Resistance (Ron) | 200 mOhm | — |
| Continuous Load Current | 1.3 A | 2 A |
| Tensión de alimentación de funcionamiento | 6 V to 52 V | — |
| Input Type | Non-Inverting (logic-level) | — |
| Temperatura de funcionamiento | -30 C to +85 C | — |
| Encapsulado / Carcasa | PG-DSO-8-24 (DSO-8 with exposed pad) | — |
| Tipo de montaje | Surface Mount | Surface Mount |
| Fault Protection | Overcurrent; Short-Circuit; Overtemperature; Overvoltage (load-dump); Reverse voltage | — |
| Diagnostic Output | Status flag | DEN pin (current sense / fault flag) |
| Estado RoHS | Compliant | Compliant |
| Product Family | — | PROFET+2 12V |
| Función | — | Smart High-Side Power Switch |
| Number of Channels | — | 1 |
| Input-to-Output Ratio | — | 1:1 |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| Operating Voltage Range | — | [DATA_NEEDED: Vbb operating range min/max] |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Rdson typ/max in mohm] |
| Limitación de corriente | — | Fixed (value not specified in retrieved data) |
| Protection Features | — | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Enable Input | — | IN pin (active-high) |
| Channel Select | — | DSEL pin |
| Slew Rate Control | — | Yes (internal, for EMI) |
| Encapsulado | — | PG-TSDSO-14 (exposed pad) |
| Temperatura de unión de funcionamiento | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 (PROFET+2 family targeted at automotive) |
| Nivel MSL | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |