ISP752TFUMA1 vs BTG70902EPLXUMA1 对比
详细并排对比 ISP752TFUMA1 出自 Infineon 和 BTG70902EPLXUMA1 出自 Infineon。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ 量产中规格对比
| 参数 | ISP752TFUMA1 | BTG70902EPLXUMA1 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 分类 | Power MOSFET Drivers | Power MOSFET Drivers |
| 生命周期状态 | 有效 | 有效 |
| 库存状态 | 有库存 | 有库存 |
| 单价（USD） | $1.02 | $0.99 |
| Product Type | Smart High-Side Power Switch | — |
| Series | PROFET™ Industrial | — |
| Switch Configuration | 1:1 (Single channel) | — |
| 输出配置 | High-Side | N-Channel High-Side |
| 输出类型 | N-Channel | — |
| On-Resistance (Ron) | 200 mOhm | — |
| Continuous Load Current | 1.3 A | 2 A |
| 工作电源电压 | 6 V to 52 V | — |
| Input Type | Non-Inverting (logic-level) | — |
| 工作温度 | -30 C to +85 C | — |
| 封装 / 外壳 | PG-DSO-8-24 (DSO-8 with exposed pad) | — |
| 安装类型 | Surface Mount | Surface Mount |
| Fault Protection | Overcurrent; Short-Circuit; Overtemperature; Overvoltage (load-dump); Reverse voltage | — |
| Diagnostic Output | Status flag | DEN pin (current sense / fault flag) |
| RoHS 状态 | Compliant | Compliant |
| Product Family | — | PROFET+2 12V |
| 功能 | — | Smart High-Side Power Switch |
| Number of Channels | — | 1 |
| Input-to-Output Ratio | — | 1:1 |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| Operating Voltage Range | — | [DATA_NEEDED: Vbb operating range min/max] |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Rdson typ/max in mohm] |
| 限流 | — | Fixed (value not specified in retrieved data) |
| Protection Features | — | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Enable Input | — | IN pin (active-high) |
| Channel Select | — | DSEL pin |
| Slew Rate Control | — | Yes (internal, for EMI) |
| 封装 | — | PG-TSDSO-14 (exposed pad) |
| 工作结温 | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 (PROFET+2 family targeted at automotive) |
| MSL 等级 | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |