ITS4090QEPDXUMA1 vs BTS3035TFATMA1 Vergleich
Detaillierter Direktvergleich von ITS4090QEPDXUMA1 von Infineon und BTS3035TFATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ITS4090QEPDXUMA1 | BTS3035TFATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power Distribution Switches | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,62 | $0,61 |
| Product Type | Quad-Channel Smart High-Side Power Switch | Low-Side Power Switch |
| Family | PROFET (PROtected FET) 24V/48V | — |
| Number of Channels | 4 | 1 |
| Topologie | High-Side Switch (N-Channel DMOS) | — |
| Typical RDS(ON) per Channel | 90 mΩ | — |
| RDS(ON) at Tj = 125 °C | 140 mΩ (typical) | — |
| Nominal Continuous Output Current per Channel | 750 mA | — |
| Minimum Current per Channel | 500 mA | — |
| Supply Voltage Range (Operating) | 4.5 V to 45 V | — |
| Supply Voltage Range (Absolute Maximum) | -0.3 V to 45 V | — |
| On-State Input Voltage (Logic High) | [DATA_NEEDED: VIH threshold] | — |
| Betriebstemperaturbereich | -40 °C to +150 °C (Tj) | -40C to +150C (junction) |
| Diagnostic Feedback | Current-sense IS pin (analog proportional to load) | — |
| Protection Features | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) | — |
| Gehäuse | PG-TSDSO-14 (exposed pad) | PG-TO252-3-313 (DPAK) |
| Montageart | Surface Mount | Surface Mount |
| PWM Capability | Up to 1 kHz (typical) | — |
| MSL-Level | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL moisture sensitivity level] |
| RoHS-Status | Compliant | Compliant |
| Technology | — | N-Channel MOSFET |
| Input Type | — | CMOS Logic Level |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| Automotive Grade | — | AEC-Q100 qualified |