ITS4090QEPDXUMA1 vs BTS3035TFATMA1 Сравнение
Подробное сравнение бок о бок ITS4090QEPDXUMA1 от Infineon и BTS3035TFATMA1 от Infineon. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Сравнение характеристик
| Параметр | ITS4090QEPDXUMA1 | BTS3035TFATMA1 |
|---|---|---|
| Бренд | Infineon | Infineon |
| Категория | Power Distribution Switches | Power MOSFET Drivers |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $1,62 | $0,61 |
| Product Type | Quad-Channel Smart High-Side Power Switch | Low-Side Power Switch |
| Family | PROFET (PROtected FET) 24V/48V | — |
| Number of Channels | 4 | 1 |
| Топология | High-Side Switch (N-Channel DMOS) | — |
| Typical RDS(ON) per Channel | 90 mΩ | — |
| RDS(ON) at Tj = 125 °C | 140 mΩ (typical) | — |
| Nominal Continuous Output Current per Channel | 750 mA | — |
| Minimum Current per Channel | 500 mA | — |
| Supply Voltage Range (Operating) | 4.5 V to 45 V | — |
| Supply Voltage Range (Absolute Maximum) | -0.3 V to 45 V | — |
| On-State Input Voltage (Logic High) | [DATA_NEEDED: VIH threshold] | — |
| Диапазон рабочих температур | -40 °C to +150 °C (Tj) | -40C to +150C (junction) |
| Diagnostic Feedback | Current-sense IS pin (analog proportional to load) | — |
| Protection Features | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) | — |
| Корпус | PG-TSDSO-14 (exposed pad) | PG-TO252-3-313 (DPAK) |
| Тип монтажа | Surface Mount | Surface Mount |
| PWM Capability | Up to 1 kHz (typical) | — |
| Уровень MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL moisture sensitivity level] |
| Статус RoHS | Compliant | Compliant |
| Technology | — | N-Channel MOSFET |
| Input Type | — | CMOS Logic Level |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| Automotive Grade | — | AEC-Q100 qualified |