ITS4090QEPDXUMA1 vs BTS3035TFATMA1 Comparaison
Comparaison détaillée côte à côte de ITS4090QEPDXUMA1 par Infineon et BTS3035TFATMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ITS4090QEPDXUMA1 | BTS3035TFATMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power Distribution Switches | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,62 | $0,61 |
| Product Type | Quad-Channel Smart High-Side Power Switch | Low-Side Power Switch |
| Family | PROFET (PROtected FET) 24V/48V | — |
| Number of Channels | 4 | 1 |
| Topologie | High-Side Switch (N-Channel DMOS) | — |
| Typical RDS(ON) per Channel | 90 mΩ | — |
| RDS(ON) at Tj = 125 °C | 140 mΩ (typical) | — |
| Nominal Continuous Output Current per Channel | 750 mA | — |
| Minimum Current per Channel | 500 mA | — |
| Supply Voltage Range (Operating) | 4.5 V to 45 V | — |
| Supply Voltage Range (Absolute Maximum) | -0.3 V to 45 V | — |
| On-State Input Voltage (Logic High) | [DATA_NEEDED: VIH threshold] | — |
| Plage de température de fonctionnement | -40 °C to +150 °C (Tj) | -40C to +150C (junction) |
| Diagnostic Feedback | Current-sense IS pin (analog proportional to load) | — |
| Protection Features | Over-current, over-temperature, over-voltage, short-circuit, reverse battery (with external resistor) | — |
| Boîtier | PG-TSDSO-14 (exposed pad) | PG-TO252-3-313 (DPAK) |
| Type de montage | Surface Mount | Surface Mount |
| PWM Capability | Up to 1 kHz (typical) | — |
| Niveau MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL moisture sensitivity level] |
| Statut RoHS | Compliant | Compliant |
| Technology | — | N-Channel MOSFET |
| Input Type | — | CMOS Logic Level |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| Automotive Grade | — | AEC-Q100 qualified |