KSZ8081RNACA-TR vs KSZ8041MLL Vergleich
Detaillierter Direktvergleich von KSZ8081RNACA-TR von Microchip Technology und KSZ8041MLL von Microchip Technology. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Microchip Technology
KSZ8081RNACA-TR - 10/100 Ethernet PHY, RMII, 24-QFN | Microchip
KSZ8081RNACA-TR ✓ Aktiv
Spezifikationsvergleich
| Parameter | KSZ8081RNACA-TR | KSZ8041MLL |
|---|---|---|
| Marke | Microchip Technology | Microchip Technology |
| Kategorie | Interface ICs | Ethernet PHYs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | 10/100BASE-TX Ethernet PHY Transceiver | — |
| Schnittstelle | RMII v1.2 (Reduced Media Independent Interface) | — |
| Supply Voltage (VDDIO/VDDA) | 3.135 V to 3.465 V (3.3 V typical) | — |
| On-chip Core Voltage | 1.2 V (generated by internal LDO) | — |
| Datenrate | 10 Mbps / 100 Mbps (auto-negotiation) | — |
| Number of Transceivers | 1/1 (Full Duplex RMII) | — |
| Cable Type | CAT-3 / CAT-5 / CAT-5e UTP | — |
| Cable Reach | Up to 140 m (CAT-5) | — |
| Standards Compliance | IEEE 802.3, IEEE 802.3u | — |
| Gehäuse | 24-QFN (4x4 mm) with exposed pad | 48-LQFP |
| Reference Clock | 25 MHz crystal or 50 MHz RMII clock input | — |
| Management Interface | MDC/MDIO (SMI, IEEE 802.3u clause 22) | — |
| Auto-MDIX | Yes (HP Auto-MDIX) | — |
| Betriebstemperatur | -40 C to +85 C (industrial) | — |
| Montageart | Surface Mount | Surface mount |
| MSL-Level | [DATA_NEEDED: MSL level] | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Strap-in Pins | PHYAD[1:0], Config (latched at reset de-assertion) | — |
| Ethernet Data Rate | — | 10 Mb/s and 100 Mb/s |
| Supported Physical Media | — | 10BASE-T and 100BASE-TX |
| Host Interface | — | Full MII |
| Versorgungsspannung | — | 3.3 V |
| Supply Configuration | — | Single supply |
| Transceiver Count | — | 1 |
| Port Count | — | 1 Ethernet port |
| Package Body Size | — | 7 mm x 7 mm |
| Pin-Anzahl | — | 48 pins |
| Automatic Crossover | — | HP Auto MDI/MDIX |
| Strapping Configuration | — | Speed, duplex, auto-negotiation, power-down, and PHY address |
| Strapping Latching | — | Power-up and reset |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Maximum Link Distance | — | [DATA_NEEDED: maximum link distance] |
| Power Consumption | — | [DATA_NEEDED: power consumption] |