KSZ8081RNACA-TR vs KSZ8041MLL Comparaison
Comparaison détaillée côte à côte de KSZ8081RNACA-TR par Microchip Technology et KSZ8041MLL par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
KSZ8081RNACA-TR - 10/100 Ethernet PHY, RMII, 24-QFN | Microchip
KSZ8081RNACA-TR ✓ Actif
Comparaison des spécifications
| Paramètre | KSZ8081RNACA-TR | KSZ8041MLL |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Interface ICs | Ethernet PHYs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | 10/100BASE-TX Ethernet PHY Transceiver | — |
| Interface | RMII v1.2 (Reduced Media Independent Interface) | — |
| Supply Voltage (VDDIO/VDDA) | 3.135 V to 3.465 V (3.3 V typical) | — |
| On-chip Core Voltage | 1.2 V (generated by internal LDO) | — |
| Débit de données | 10 Mbps / 100 Mbps (auto-negotiation) | — |
| Number of Transceivers | 1/1 (Full Duplex RMII) | — |
| Cable Type | CAT-3 / CAT-5 / CAT-5e UTP | — |
| Cable Reach | Up to 140 m (CAT-5) | — |
| Standards Compliance | IEEE 802.3, IEEE 802.3u | — |
| Boîtier | 24-QFN (4x4 mm) with exposed pad | 48-LQFP |
| Reference Clock | 25 MHz crystal or 50 MHz RMII clock input | — |
| Management Interface | MDC/MDIO (SMI, IEEE 802.3u clause 22) | — |
| Auto-MDIX | Yes (HP Auto-MDIX) | — |
| Température de fonctionnement | -40 C to +85 C (industrial) | — |
| Type de montage | Surface Mount | Surface mount |
| Niveau MSL | [DATA_NEEDED: MSL level] | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Strap-in Pins | PHYAD[1:0], Config (latched at reset de-assertion) | — |
| Ethernet Data Rate | — | 10 Mb/s and 100 Mb/s |
| Supported Physical Media | — | 10BASE-T and 100BASE-TX |
| Host Interface | — | Full MII |
| Tension d'alimentation | — | 3.3 V |
| Supply Configuration | — | Single supply |
| Transceiver Count | — | 1 |
| Port Count | — | 1 Ethernet port |
| Package Body Size | — | 7 mm x 7 mm |
| Nombre de broches | — | 48 pins |
| Automatic Crossover | — | HP Auto MDI/MDIX |
| Strapping Configuration | — | Speed, duplex, auto-negotiation, power-down, and PHY address |
| Strapping Latching | — | Power-up and reset |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Maximum Link Distance | — | [DATA_NEEDED: maximum link distance] |
| Power Consumption | — | [DATA_NEEDED: power consumption] |