L6566BTR vs ICE3A2065Z Vergleich
Detaillierter Direktvergleich von L6566BTR von STMicroelectronics und ICE3A2065Z von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
L6566BTR - Multi-Mode PWM SMPS Controller, 300kHz, SO-16 | STMicroelectronics
L6566BTR ✓ Aktiv
Spezifikationsvergleich
| Parameter | L6566BTR | ICE3A2065Z |
|---|---|---|
| Marke | STMicroelectronics | Infineon |
| Kategorie | DC-DC Converters | DC-DC Converters |
| Lebenszyklusstatus | Aktiv | NRND |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,68 | $0,58 |
| Topologie | Flyback (Offline), multi-mode (fixed-frequency / quasi-resonant) | Flyback (off-line SMPS current-mode controller) |
| Switching Frequency Range | 10 kHz to 300 kHz (programmable) | — |
| Supply Voltage (Vcc) | 8 V to 23 V | — |
| Peak Gate Drive Source/Sink Current | 800 mA | — |
| Ruhestrom | 3 mA (typical) | — |
| High-Voltage Start-up | On-board 700 V MOSFET | — |
| Control Mode | Current-mode PWM | — |
| UVLO | Adaptive (with line feedforward) | — |
| Light-Load Management | Burst-mode / frequency foldback | — |
| Protection Features | OCP, OVP, transformer saturation detection, auto-restart | — |
| Gehäuse | SO-16 (narrow body, 150 mil) | PG-DIP-7-1 (7-pin PDIP through-hole) |
| Montageart | Surface Mount | Through-Hole (THT) |
| Betriebstemperatur | -40C to +150C (junction) | — |
| MSL-Level | 1 | — |
| RoHS-Status | Compliant | — |
| Lead-Free Finish | Yes (Matte Tin) | — |
| Schaltfrequenz | — | 100 kHz fixed |
| Integrated Power Switch | — | 650V Depletion CoolMOS |
| Drain-Source Breakdown Voltage (VDS max) | — | 650 V |
| On-Resistance (RDS(on) max) | — | 1.05 ohm |
| Maximum Drain Current (ID max) | — | 2.0 A pulsed |
| Maximum Output Power | — | 28 W (typical adapter application) |
| VCC Supply Voltage Range | — | 8.5 V to 21 V |
| Quiescent Current (ICC) | — | 7.1 mA |
| Betriebs-Sperrschichttemperatur | — | -25 °C to +130 °C |
| Thermal Resistance Junction-to-Ambient (RthJA) | — | 96 K/W |
| ESD Protection (HBM) | — | 3.0 kV |
| Burst Mode | — | Active Burst Mode (standby < 100 mW at no load) |
| Lead-Free / RoHS | — | Compliant (per device spec excerpt) |
| Recommended Replacement | — | ICE3A2065ELJ (new design only; different package) |