L6566BTR vs ICE3A2065Z Comparaison
Comparaison détaillée côte à côte de L6566BTR par STMicroelectronics et ICE3A2065Z par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
L6566BTR - Multi-Mode PWM SMPS Controller, 300kHz, SO-16 | STMicroelectronics
L6566BTR ✓ Actif
Comparaison des spécifications
| Paramètre | L6566BTR | ICE3A2065Z |
|---|---|---|
| Marque | STMicroelectronics | Infineon |
| Catégorie | DC-DC Converters | DC-DC Converters |
| Statut du cycle de vie | Actif | NRND |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,68 | $0,58 |
| Topologie | Flyback (Offline), multi-mode (fixed-frequency / quasi-resonant) | Flyback (off-line SMPS current-mode controller) |
| Switching Frequency Range | 10 kHz to 300 kHz (programmable) | — |
| Supply Voltage (Vcc) | 8 V to 23 V | — |
| Peak Gate Drive Source/Sink Current | 800 mA | — |
| Courant de repos | 3 mA (typical) | — |
| High-Voltage Start-up | On-board 700 V MOSFET | — |
| Control Mode | Current-mode PWM | — |
| UVLO | Adaptive (with line feedforward) | — |
| Light-Load Management | Burst-mode / frequency foldback | — |
| Protection Features | OCP, OVP, transformer saturation detection, auto-restart | — |
| Boîtier | SO-16 (narrow body, 150 mil) | PG-DIP-7-1 (7-pin PDIP through-hole) |
| Type de montage | Surface Mount | Through-Hole (THT) |
| Température de fonctionnement | -40C to +150C (junction) | — |
| Niveau MSL | 1 | — |
| Statut RoHS | Compliant | — |
| Lead-Free Finish | Yes (Matte Tin) | — |
| Fréquence de commutation | — | 100 kHz fixed |
| Integrated Power Switch | — | 650V Depletion CoolMOS |
| Drain-Source Breakdown Voltage (VDS max) | — | 650 V |
| On-Resistance (RDS(on) max) | — | 1.05 ohm |
| Maximum Drain Current (ID max) | — | 2.0 A pulsed |
| Maximum Output Power | — | 28 W (typical adapter application) |
| VCC Supply Voltage Range | — | 8.5 V to 21 V |
| Quiescent Current (ICC) | — | 7.1 mA |
| Température de jonction en fonctionnement | — | -25 °C to +130 °C |
| Thermal Resistance Junction-to-Ambient (RthJA) | — | 96 K/W |
| ESD Protection (HBM) | — | 3.0 kV |
| Burst Mode | — | Active Burst Mode (standby < 100 mW at no load) |
| Lead-Free / RoHS | — | Compliant (per device spec excerpt) |
| Recommended Replacement | — | ICE3A2065ELJ (new design only; different package) |