LM111-LM211 vs LT111A Vergleich
Detaillierter Direktvergleich von LM111-LM211 von Texas Instruments und LT111A von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
LM111-LM211 - High-Speed Differential Comparator | Texas Instruments
LM111-LM211 Unknown
Spezifikationsvergleich
| Parameter | LM111-LM211 | LT111A |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Unknown | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,00 | $0,00 |
| Product Type | Single differential voltage comparator | General-purpose voltage comparator |
| Comparator Family | LM111, LM211, LM311 | — |
| Supply Compatibility | ±15 V and single +5 V supplies | — |
| Input Configuration | Differential | — |
| Input Current | Low input current; exact maximum value depends on selected variant | — |
| Ausgangstyp | Open-collector | — |
| Logic Compatibility | Compatible with most TTL and MOS circuits | — |
| LM111-N Operating Temperature | −55°C to +125°C | — |
| LM211-N Operating Temperature | −25°C to +85°C | — |
| LM311-N Operating Temperature | 0°C to +70°C | — |
| LM111-N Pin Configuration | Same as LM106 and LM710, according to TI product information | — |
| Typical Applications | Precision squaring and peak detection | — |
| Comparator Function | Compares two input voltages and provides a logic output | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range for selected package and variant] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage for selected variant] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay for selected variant and test conditions] | — |
| Output Pull-Up Requirement | [DATA_NEEDED: recommended pull-up resistor and pull-up voltage] | — |
| Gehäuse | [DATA_NEEDED: selected orderable package for LM111-LM211 family] | TO-5 |
| Montageart | [DATA_NEEDED: selected orderable package mounting type] | [DATA_NEEDED: mounting type] |
| RoHS-Status | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | unknown | [DATA_NEEDED: AEC-Q100 qualification] |
| Maximum Input Offset Voltage | — | 1.0 mV |
| Maximum Input Offset Current | — | 5.0 nA |
| Maximum Response Time | — | 250 ns |
| Supply Configuration | — | Single 5 V to ±15 V |
| Differential Input Signal Range | — | ±30 V |
| Maximum Output Load Current | — | 50 mA referenced to ground or either supply |
| Output Ground | — | Separate output ground pin |
| Input Offset Balancing | — | Supported |
| Strobe Capability | — | Supported |
| Output OR Capability | — | Supported |
| Positive Input Voltage Limit | — | 30 V above negative supply |
| Negative Input Voltage Limit | — | Negative supply |
| Maximum Junction Temperature | — | 150 °C |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |