LM111-LM211 vs LT111A 对比
详细并排对比 LM111-LM211 出自 Texas Instruments 和 LT111A 出自 Analog Devices。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Texas Instruments
LM111-LM211 - High-Speed Differential Comparator | Texas Instruments
LM111-LM211 Unknown
规格对比
| 参数 | LM111-LM211 | LT111A |
|---|---|---|
| 品牌 | Texas Instruments | Analog Devices |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | Unknown | Obsolete |
| 库存状态 | 有库存 | 有库存 |
| 单价（USD） | $0.00 | $0.00 |
| Product Type | Single differential voltage comparator | General-purpose voltage comparator |
| Comparator Family | LM111, LM211, LM311 | — |
| Supply Compatibility | ±15 V and single +5 V supplies | — |
| Input Configuration | Differential | — |
| Input Current | Low input current; exact maximum value depends on selected variant | — |
| 输出类型 | Open-collector | — |
| Logic Compatibility | Compatible with most TTL and MOS circuits | — |
| LM111-N Operating Temperature | −55°C to +125°C | — |
| LM211-N Operating Temperature | −25°C to +85°C | — |
| LM311-N Operating Temperature | 0°C to +70°C | — |
| LM111-N Pin Configuration | Same as LM106 and LM710, according to TI product information | — |
| Typical Applications | Precision squaring and peak detection | — |
| Comparator Function | Compares two input voltages and provides a logic output | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range for selected package and variant] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage for selected variant] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay for selected variant and test conditions] | — |
| Output Pull-Up Requirement | [DATA_NEEDED: recommended pull-up resistor and pull-up voltage] | — |
| 封装 | [DATA_NEEDED: selected orderable package for LM111-LM211 family] | TO-5 |
| 安装类型 | [DATA_NEEDED: selected orderable package mounting type] | [DATA_NEEDED: mounting type] |
| RoHS 状态 | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | unknown | [DATA_NEEDED: AEC-Q100 qualification] |
| Maximum Input Offset Voltage | — | 1.0 mV |
| Maximum Input Offset Current | — | 5.0 nA |
| Maximum Response Time | — | 250 ns |
| Supply Configuration | — | Single 5 V to ±15 V |
| Differential Input Signal Range | — | ±30 V |
| Maximum Output Load Current | — | 50 mA referenced to ground or either supply |
| Output Ground | — | Separate output ground pin |
| Input Offset Balancing | — | Supported |
| Strobe Capability | — | Supported |
| Output OR Capability | — | Supported |
| Positive Input Voltage Limit | — | 30 V above negative supply |
| Negative Input Voltage Limit | — | Negative supply |
| Maximum Junction Temperature | — | 150 °C |
| 工作温度范围 | — | [DATA_NEEDED: operating temperature range] |