LM111-LM211 vs LT111A Comparação
Comparação detalhada lado a lado de LM111-LM211 por Texas Instruments e LT111A por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
LM111-LM211 - High-Speed Differential Comparator | Texas Instruments
LM111-LM211 Unknown
Comparação de especificações
| Parâmetro | LM111-LM211 | LT111A |
|---|---|---|
| Marca | Texas Instruments | Analog Devices |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Unknown | Obsolete |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $0,00 | $0,00 |
| Product Type | Single differential voltage comparator | General-purpose voltage comparator |
| Comparator Family | LM111, LM211, LM311 | — |
| Supply Compatibility | ±15 V and single +5 V supplies | — |
| Input Configuration | Differential | — |
| Input Current | Low input current; exact maximum value depends on selected variant | — |
| Tipo de saída | Open-collector | — |
| Logic Compatibility | Compatible with most TTL and MOS circuits | — |
| LM111-N Operating Temperature | −55°C to +125°C | — |
| LM211-N Operating Temperature | −25°C to +85°C | — |
| LM311-N Operating Temperature | 0°C to +70°C | — |
| LM111-N Pin Configuration | Same as LM106 and LM710, according to TI product information | — |
| Typical Applications | Precision squaring and peak detection | — |
| Comparator Function | Compares two input voltages and provides a logic output | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range for selected package and variant] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage for selected variant] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay for selected variant and test conditions] | — |
| Output Pull-Up Requirement | [DATA_NEEDED: recommended pull-up resistor and pull-up voltage] | — |
| Encapsulamento | [DATA_NEEDED: selected orderable package for LM111-LM211 family] | TO-5 |
| Tipo de montagem | [DATA_NEEDED: selected orderable package mounting type] | [DATA_NEEDED: mounting type] |
| Status RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | unknown | [DATA_NEEDED: AEC-Q100 qualification] |
| Maximum Input Offset Voltage | — | 1.0 mV |
| Maximum Input Offset Current | — | 5.0 nA |
| Maximum Response Time | — | 250 ns |
| Supply Configuration | — | Single 5 V to ±15 V |
| Differential Input Signal Range | — | ±30 V |
| Maximum Output Load Current | — | 50 mA referenced to ground or either supply |
| Output Ground | — | Separate output ground pin |
| Input Offset Balancing | — | Supported |
| Strobe Capability | — | Supported |
| Output OR Capability | — | Supported |
| Positive Input Voltage Limit | — | 30 V above negative supply |
| Negative Input Voltage Limit | — | Negative supply |
| Maximum Junction Temperature | — | 150 °C |
| Faixa de temperatura de operação | — | [DATA_NEEDED: operating temperature range] |