LM2903DR2 vs LM2903DG Vergleich
Detaillierter Direktvergleich von LM2903DR2 von onsemi und LM2903DG von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | LM2903DR2 | LM2903DG |
|---|---|---|
| Marke | onsemi | onsemi |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Comparator Type | Dual differential voltage comparator | General purpose, differential |
| Number of Channels | 2 channels | 2 (dual independent comparators) |
| Supply Voltage Range | 2 V to 36 V | — |
| Supply Configuration | Single or split supply | — |
| Common-Mode Input Range | Extended to ground with single-supply operation | Includes ground (negative rail) in single-supply operation |
| Input Offset Voltage | As low as 2.0 mV | — |
| Ausgangstyp | Open-collector | Open-collector, rail-to-rail output swing |
| Gehäuse | 8-pin SOIC | SOIC-8 (D suffix), 8 pins |
| Pin-Anzahl | 8 pins | — |
| Montageart | Surface mount | Surface Mount |
| Comparator Independence | 2 independent channels | — |
| Logic Compatibility | Compatible with TTL, MOS, and CMOS interfaces | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40C to +105C |
| Differential Input Voltage | [DATA_NEEDED: differential input voltage range] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Versorgungsstrom | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Supply Voltage Range (Single) | — | 2 V to 36 V |
| Supply Voltage Range (Split) | — | +/-1 V to +/-18 V |
| Input Offset Voltage (Typ) | — | 2 mV |
| Response Time / Propagation Delay | — | 1.3 us (typical) |
| Supply Current per Comparator | — | 0.4 mA (typical, largely independent of VCC) |
| Maximum Supply Voltage Rating | — | 36 V (V-suffix devices tested to 32 V) |
| Minimum VCC Above Common-Mode | — | 1.5 V |
| Description Category | — | Low Offset Voltage Dual Comparators |