LM2903DR2 vs LM2903DG So sánh

So sánh chi tiết song song của LM2903DR2 bằng onsemi và LM2903DG bằng onsemi. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

onsemi
LM2903DR2 LM2903DR2 - Dual 36 V Comparator | onsemi | SOIC-8

LM2903DR2 - Dual 36 V Comparator | onsemi | SOIC-8

LM2903DR2 ✓ Hoạt động
onsemi
LM2903DG LM2903DG - Dual Comparator, 2-36V, SOIC-8 | onsemi

LM2903DG - Dual Comparator, 2-36V, SOIC-8 | onsemi

LM2903DG ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số LM2903DR2 LM2903DG
Thương hiệu onsemi onsemi
Danh mục Amplifier ICs Amplifier ICs
Trạng thái vòng đời Hoạt động Hoạt động
Comparator Type Dual differential voltage comparator General purpose, differential
Number of Channels 2 channels 2 (dual independent comparators)
Supply Voltage Range 2 V to 36 V —
Supply Configuration Single or split supply —
Common-Mode Input Range Extended to ground with single-supply operation Includes ground (negative rail) in single-supply operation
Input Offset Voltage As low as 2.0 mV —
Kiểu đầu ra Open-collector Open-collector, rail-to-rail output swing
Hộp 8-pin SOIC SOIC-8 (D suffix), 8 pins
Số chân 8 pins —
Kiểu lắp đặt Surface mount Surface Mount
Comparator Independence 2 independent channels —
Logic Compatibility Compatible with TTL, MOS, and CMOS interfaces —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] -40C to +105C
Differential Input Voltage [DATA_NEEDED: differential input voltage range] —
Input Bias Current [DATA_NEEDED: input bias current] —
Điện áp cung cấp [DATA_NEEDED: supply current per channel] —
Propagation Delay [DATA_NEEDED: propagation delay] —
Output Saturation Voltage [DATA_NEEDED: output saturation voltage] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Supply Voltage Range (Single) — 2 V to 36 V
Supply Voltage Range (Split) — +/-1 V to +/-18 V
Input Offset Voltage (Typ) — 2 mV
Response Time / Propagation Delay — 1.3 us (typical)
Supply Current per Comparator — 0.4 mA (typical, largely independent of VCC)
Maximum Supply Voltage Rating — 36 V (V-suffix devices tested to 32 V)
Minimum VCC Above Common-Mode — 1.5 V
Description Category — Low Offset Voltage Dual Comparators

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá