LM2903DR2 vs LM2903DG Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM2903DR2 tarafından onsemi ve LM2903DG tarafından onsemiAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM2903DR2 | LM2903DG |
|---|---|---|
| Marka | onsemi | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Comparator Type | Dual differential voltage comparator | General purpose, differential |
| Number of Channels | 2 channels | 2 (dual independent comparators) |
| Supply Voltage Range | 2 V to 36 V | — |
| Supply Configuration | Single or split supply | — |
| Common-Mode Input Range | Extended to ground with single-supply operation | Includes ground (negative rail) in single-supply operation |
| Input Offset Voltage | As low as 2.0 mV | — |
| Çıkış Türü | Open-collector | Open-collector, rail-to-rail output swing |
| Paket | 8-pin SOIC | SOIC-8 (D suffix), 8 pins |
| Pin Sayısı | 8 pins | — |
| Montaj Türü | Surface mount | Surface Mount |
| Comparator Independence | 2 independent channels | — |
| Logic Compatibility | Compatible with TTL, MOS, and CMOS interfaces | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | -40C to +105C |
| Differential Input Voltage | [DATA_NEEDED: differential input voltage range] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Besleme Akımı | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Supply Voltage Range (Single) | — | 2 V to 36 V |
| Supply Voltage Range (Split) | — | +/-1 V to +/-18 V |
| Input Offset Voltage (Typ) | — | 2 mV |
| Response Time / Propagation Delay | — | 1.3 us (typical) |
| Supply Current per Comparator | — | 0.4 mA (typical, largely independent of VCC) |
| Maximum Supply Voltage Rating | — | 36 V (V-suffix devices tested to 32 V) |
| Minimum VCC Above Common-Mode | — | 1.5 V |
| Description Category | — | Low Offset Voltage Dual Comparators |