MAX202IDR vs ST202BDR Vergleich
Detaillierter Direktvergleich von MAX202IDR von Texas Instruments und ST202BDR von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
MAX202IDR - 120kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX202IDR ✓ AktivSpezifikationsvergleich
| Parameter | MAX202IDR | ST202BDR |
|---|---|---|
| Marke | Texas Instruments | STMicroelectronics |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | 5 V dual RS-232 line driver/receiver | — |
| Channel Configuration | 2 line drivers and 2 line receivers | — |
| Maximum Data Rate | 120 kbps | — |
| Versorgungsspannung | 5 V nominal | — |
| Betriebstemperaturbereich | -40 °C to +85 °C | -40C to +85C |
| Driver Output Levels | ±9 V | — |
| ESD Protection | ±15 kV human-body-model protection | — |
| External Charge-Pump Capacitors | Four 0.1 µF capacitors | — |
| Interface Standard | TIA/EIA-232-F | — |
| Transceiver Type | Full-duplex 2/2 RS-232 transceiver | — |
| Gehäuse | 16-pin SOIC | SOIC-16 (SO-16) |
| Montageart | Surface mount | Surface Mount |
| Logic Compatibility | TTL/CMOS logic-level interface | — |
| ESD Coverage | Serial-port connection pins, including ground | — |
| Quoted Output Signal Levels | ±5 V EIA/TIA-232E under specified loading | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Device Type | — | RS-232 Transceiver (2 Drivers / 2 Receivers) |
| Protocol Standard | — | EIA/TIA-232, V.28 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Supply Current, No Load (Typ) | — | 1.5 mA |
| Datenrate | — | 400 kbps |
| Transmitter Output Voltage Swing (Typ) | — | +/- 9 V |
| Transition Slew Rate (Typ) | — | 12 V/us |
| Receiver Propagation Delay (Typ) | — | 0.1 us |
| Receiver Input Voltage Range | — | +/- 30 V |
| External Capacitors Required | — | 4 x 0.1 uF |
| Pin Compatibility | — | Compatible with MAX202 |
| Anzahl der Pins | — | 16 |
| Power Supply | — | Single 5 V |