MAX202IDR vs ST202BDR Comparaison
Comparaison détaillée côte à côte de MAX202IDR par Texas Instruments et ST202BDR par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
MAX202IDR - 120kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX202IDR ✓ ActifComparaison des spécifications
| Paramètre | MAX202IDR | ST202BDR |
|---|---|---|
| Marque | Texas Instruments | STMicroelectronics |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | 5 V dual RS-232 line driver/receiver | — |
| Channel Configuration | 2 line drivers and 2 line receivers | — |
| Maximum Data Rate | 120 kbps | — |
| Tension d'alimentation | 5 V nominal | — |
| Plage de température de fonctionnement | -40 °C to +85 °C | -40C to +85C |
| Driver Output Levels | ±9 V | — |
| ESD Protection | ±15 kV human-body-model protection | — |
| External Charge-Pump Capacitors | Four 0.1 µF capacitors | — |
| Interface Standard | TIA/EIA-232-F | — |
| Transceiver Type | Full-duplex 2/2 RS-232 transceiver | — |
| Boîtier | 16-pin SOIC | SOIC-16 (SO-16) |
| Type de montage | Surface mount | Surface Mount |
| Logic Compatibility | TTL/CMOS logic-level interface | — |
| ESD Coverage | Serial-port connection pins, including ground | — |
| Quoted Output Signal Levels | ±5 V EIA/TIA-232E under specified loading | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Device Type | — | RS-232 Transceiver (2 Drivers / 2 Receivers) |
| Protocol Standard | — | EIA/TIA-232, V.28 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Supply Current, No Load (Typ) | — | 1.5 mA |
| Débit de données | — | 400 kbps |
| Transmitter Output Voltage Swing (Typ) | — | +/- 9 V |
| Transition Slew Rate (Typ) | — | 12 V/us |
| Receiver Propagation Delay (Typ) | — | 0.1 us |
| Receiver Input Voltage Range | — | +/- 30 V |
| External Capacitors Required | — | 4 x 0.1 uF |
| Pin Compatibility | — | Compatible with MAX202 |
| Nombre de broches | — | 16 |
| Power Supply | — | Single 5 V |