MAX202IDR vs ST202BDR Comparación
Comparación detallada lado a lado de MAX202IDR por Texas Instruments y ST202BDR por STMicroelectronics. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
MAX202IDR - 120kbps Dual RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX202IDR ✓ ActivoComparación de especificaciones
| Parámetro | MAX202IDR | ST202BDR |
|---|---|---|
| Marca | Texas Instruments | STMicroelectronics |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | 5 V dual RS-232 line driver/receiver | — |
| Channel Configuration | 2 line drivers and 2 line receivers | — |
| Maximum Data Rate | 120 kbps | — |
| Tensión de alimentación | 5 V nominal | — |
| Rango de temperatura de funcionamiento | -40 °C to +85 °C | -40C to +85C |
| Driver Output Levels | ±9 V | — |
| ESD Protection | ±15 kV human-body-model protection | — |
| External Charge-Pump Capacitors | Four 0.1 µF capacitors | — |
| Interface Standard | TIA/EIA-232-F | — |
| Transceiver Type | Full-duplex 2/2 RS-232 transceiver | — |
| Encapsulado | 16-pin SOIC | SOIC-16 (SO-16) |
| Tipo de montaje | Surface mount | Surface Mount |
| Logic Compatibility | TTL/CMOS logic-level interface | — |
| ESD Coverage | Serial-port connection pins, including ground | — |
| Quoted Output Signal Levels | ±5 V EIA/TIA-232E under specified loading | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Device Type | — | RS-232 Transceiver (2 Drivers / 2 Receivers) |
| Protocol Standard | — | EIA/TIA-232, V.28 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Supply Current, No Load (Typ) | — | 1.5 mA |
| Velocidad de datos | — | 400 kbps |
| Transmitter Output Voltage Swing (Typ) | — | +/- 9 V |
| Transition Slew Rate (Typ) | — | 12 V/us |
| Receiver Propagation Delay (Typ) | — | 0.1 us |
| Receiver Input Voltage Range | — | +/- 30 V |
| External Capacitors Required | — | 4 x 0.1 uF |
| Pin Compatibility | — | Compatible with MAX202 |
| Número de pines | — | 16 |
| Power Supply | — | Single 5 V |