MAX232DR vs ADM232LAR Vergleich
Detaillierter Direktvergleich von MAX232DR von Texas Instruments und ADM232LAR von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
MAX232DR - 5V Dual RS-232 Transceiver, 120kbps, SOIC-16 | TI (Tape & Reel)
MAX232DR ✓ AktivSpezifikationsvergleich
| Parameter | MAX232DR | ADM232LAR |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Funktion | Dual RS-232 line driver/receiver (2/2 transceiver, full) | — |
| Datenrate | 120 kbps | 120 kB/s |
| Supply Voltage (Vcc) | 4.5 V to 5.5 V | — |
| Versorgungsstrom | 8 mA typical | [DATA_NEEDED: typical and maximum supply current] |
| Receiver Input Levels | +/-30 V tolerant | — |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| Charge Pump Capacitors Required | 4 external (typically 1 uF) | — |
| Generated RS-232 Rails | Approx. +/-9 V to +/-10 V from internal charge pump | — |
| Compliance | TIA/EIA-232-F, ITU V.28 | — |
| ESD Protection (RS-232 pins) | [DATA_NEEDED: datasheet ESD figure] | — |
| Betriebstemperatur | 0 C to +70 C (commercial grade) | — |
| Gehäuse | SOIC-16 (D) | 16-lead SOIC (SOIC-16) |
| Montageart | Surface Mount | Surface Mount |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status for ADM232LAR] |
| Lead-Free / Halogen-Free | Yes / [DATA_NEEDED: halogen-free] | — |
| Interchangeable With | Maxim MAX232 (industry-standard die) | — |
| Versorgungsspannung | — | 5 V (single supply) |
| Transceiver Configuration | — | 2 drivers / 2 receivers (2/2) |
| Interface Standard Compliance | — | EIA-232-E and V.28 |
| Output Swing | — | 9 V with 5 V supply |
| On-Board DC-DC Converters | — | Yes |
| Required External Capacitors | — | 1 uF |
| Shutdown | — | Low power shutdown mode |
| Receiver Supply Current in Shutdown | — | 1 uA (receivers active in shutdown) |
| Receiver Input Voltage Tolerance | — | 30 V |
| Anzahl der Pins | — | 16 |
| Technology | — | CMOS |
| Automotive Qualification (AEC-Q100) | — | not_applicable |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| REACH Status | — | [DATA_NEEDED: REACH status for ADM232LAR] |