MAX232DR vs ADM232LAR Comparaison
Comparaison détaillée côte à côte de MAX232DR par Texas Instruments et ADM232LAR par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
MAX232DR - 5V Dual RS-232 Transceiver, 120kbps, SOIC-16 | TI (Tape & Reel)
MAX232DR ✓ ActifComparaison des spécifications
| Paramètre | MAX232DR | ADM232LAR |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Dual RS-232 line driver/receiver (2/2 transceiver, full) | — |
| Débit de données | 120 kbps | 120 kB/s |
| Supply Voltage (Vcc) | 4.5 V to 5.5 V | — |
| Courant d'alimentation | 8 mA typical | [DATA_NEEDED: typical and maximum supply current] |
| Receiver Input Levels | +/-30 V tolerant | — |
| Number of Drivers | 2 | — |
| Number of Receivers | 2 | — |
| Charge Pump Capacitors Required | 4 external (typically 1 uF) | — |
| Generated RS-232 Rails | Approx. +/-9 V to +/-10 V from internal charge pump | — |
| Compliance | TIA/EIA-232-F, ITU V.28 | — |
| ESD Protection (RS-232 pins) | [DATA_NEEDED: datasheet ESD figure] | — |
| Température de fonctionnement | 0 C to +70 C (commercial grade) | — |
| Boîtier | SOIC-16 (D) | 16-lead SOIC (SOIC-16) |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status for ADM232LAR] |
| Lead-Free / Halogen-Free | Yes / [DATA_NEEDED: halogen-free] | — |
| Interchangeable With | Maxim MAX232 (industry-standard die) | — |
| Tension d'alimentation | — | 5 V (single supply) |
| Transceiver Configuration | — | 2 drivers / 2 receivers (2/2) |
| Interface Standard Compliance | — | EIA-232-E and V.28 |
| Output Swing | — | 9 V with 5 V supply |
| On-Board DC-DC Converters | — | Yes |
| Required External Capacitors | — | 1 uF |
| Shutdown | — | Low power shutdown mode |
| Receiver Supply Current in Shutdown | — | 1 uA (receivers active in shutdown) |
| Receiver Input Voltage Tolerance | — | 30 V |
| Nombre de broches | — | 16 |
| Technology | — | CMOS |
| Automotive Qualification (AEC-Q100) | — | not_applicable |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| REACH Status | — | [DATA_NEEDED: REACH status for ADM232LAR] |