MAX232DR vs ADM232LAR So sánh

So sánh chi tiết song song của MAX232DR bằng Texas Instruments và ADM232LAR bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
ADM232LAR ADM232LAR - 5V 2/2 RS-232 Transceiver, 120kB/s | Analog Devices

ADM232LAR - 5V 2/2 RS-232 Transceiver, 120kB/s | Analog Devices

ADM232LAR ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX232DR ADM232LAR
Thương hiệu Texas Instruments Analog Devices
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Chức năng Dual RS-232 line driver/receiver (2/2 transceiver, full) —
Tốc độ dữ liệu 120 kbps 120 kB/s
Supply Voltage (Vcc) 4.5 V to 5.5 V —
Điện áp cung cấp 8 mA typical [DATA_NEEDED: typical and maximum supply current]
Receiver Input Levels +/-30 V tolerant —
Number of Drivers 2 —
Number of Receivers 2 —
Charge Pump Capacitors Required 4 external (typically 1 uF) —
Generated RS-232 Rails Approx. +/-9 V to +/-10 V from internal charge pump —
Compliance TIA/EIA-232-F, ITU V.28 —
ESD Protection (RS-232 pins) [DATA_NEEDED: datasheet ESD figure] —
Nhiệt độ hoạt động 0 C to +70 C (commercial grade) —
Hộp SOIC-16 (D) 16-lead SOIC (SOIC-16)
Kiểu lắp đặt Surface Mount Surface Mount
Trạng thái RoHS Compliant [DATA_NEEDED: RoHS status for ADM232LAR]
Lead-Free / Halogen-Free Yes / [DATA_NEEDED: halogen-free] —
Interchangeable With Maxim MAX232 (industry-standard die) —
Điện áp cung cấp — 5 V (single supply)
Transceiver Configuration — 2 drivers / 2 receivers (2/2)
Interface Standard Compliance — EIA-232-E and V.28
Output Swing — 9 V with 5 V supply
On-Board DC-DC Converters — Yes
Required External Capacitors — 1 uF
Shutdown — Low power shutdown mode
Receiver Supply Current in Shutdown — 1 uA (receivers active in shutdown)
Receiver Input Voltage Tolerance — 30 V
Số lượng chân — 16
Technology — CMOS
Automotive Qualification (AEC-Q100) — not_applicable
Khoảng nhiệt độ hoạt động — [DATA_NEEDED: operating temperature range]
Driver Output Current — [DATA_NEEDED: driver output current]
REACH Status — [DATA_NEEDED: REACH status for ADM232LAR]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá