MAX3485CSA+T vs MAX3485CSA+ Vergleich

Detaillierter Direktvergleich von MAX3485CSA+T von Analog Devices und MAX3485CSA+ von Maxim Integrated. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Analog Devices
MAX3485CSA+T MAX3485CSA+T - 3.3V 10Mbps RS-485/422 | Analog Devices

MAX3485CSA+T - 3.3V 10Mbps RS-485/422 | Analog Devices

MAX3485CSA+T ✓ Aktiv
Maxim Integrated
MAX3485CSA+ MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ Unknown

Spezifikationsvergleich

Parameter MAX3485CSA+T MAX3485CSA+
Marke Analog Devices Maxim Integrated
Kategorie Interface ICs Interface ICs
Lebenszyklusstatus Aktiv Unknown
Product Type RS-485/RS-422 half-duplex transceiver RS-485/RS-422 transceiver
Supply Voltage Range 3 V to 3.6 V —
Maximum Data Rate 10 Mbps —
Driver Channels 1 —
Receiver Channels 1 —
Duplex Mode Half-duplex Half-duplex
Supported Standards RS-422 and RS-485 RS-485 and RS-422
Gehäuse 8-pin SOIC (NSOIC-8) 8-SOIC, 0.154 inch, 3.90 mm width
Montageart Surface mount Surface mount
Driver Edge Rate Slew-rate limited —
Driver Fault Protection Short-circuit current limiting and thermal shutdown —
Receiver Fail-Safe Supported —
Driver Output State During Thermal Shutdown High impedance —
Betriebstemperaturbereich [DATA_NEEDED: operating temperature range] 0C to +70C
Quiescent Supply Current [DATA_NEEDED: quiescent supply current] —
ESD Protection [DATA_NEEDED: ESD protection rating] [DATA_NEEDED: ESD protection rating]
RoHS-Status [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Standard Reel Quantity [DATA_NEEDED: standard reel quantity] —
Versorgungsspannung — 3.3 V
Datenrate — 10 Mbps
Driver Count — 1 driver
Receiver Count — 1 receiver
Driver Feature — Slew-rate-limited driver family feature
Short-Circuit Protection — Short-circuit current limited driver
Thermisches Abschalten — Driver enters high-impedance state during thermal shutdown
Receiver Feature — Fail-safe receiver input
Channel Direction — 1 transmitter and 1 receiver
Receiver Input Common-Mode Range — [DATA_NEEDED: receiver input common-mode range]
Versorgungsstrom — [DATA_NEEDED: operating and quiescent supply current]
Logic Output Levels — [DATA_NEEDED: logic output voltage levels]
Termination Requirement — [DATA_NEEDED: termination and biasing requirements]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern