MAX3485CSA+T vs MAX3485CSA+ Comparaison

Comparaison détaillée côte à côte de MAX3485CSA+T par Analog Devices et MAX3485CSA+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
MAX3485CSA+T MAX3485CSA+T - 3.3V 10Mbps RS-485/422 | Analog Devices

MAX3485CSA+T - 3.3V 10Mbps RS-485/422 | Analog Devices

MAX3485CSA+T ✓ Actif
Maxim Integrated
MAX3485CSA+ MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ Unknown

Comparaison des spécifications

Paramètre MAX3485CSA+T MAX3485CSA+
Marque Analog Devices Maxim Integrated
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Unknown
Product Type RS-485/RS-422 half-duplex transceiver RS-485/RS-422 transceiver
Supply Voltage Range 3 V to 3.6 V —
Maximum Data Rate 10 Mbps —
Driver Channels 1 —
Receiver Channels 1 —
Duplex Mode Half-duplex Half-duplex
Supported Standards RS-422 and RS-485 RS-485 and RS-422
Boîtier 8-pin SOIC (NSOIC-8) 8-SOIC, 0.154 inch, 3.90 mm width
Type de montage Surface mount Surface mount
Driver Edge Rate Slew-rate limited —
Driver Fault Protection Short-circuit current limiting and thermal shutdown —
Receiver Fail-Safe Supported —
Driver Output State During Thermal Shutdown High impedance —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] 0C to +70C
Quiescent Supply Current [DATA_NEEDED: quiescent supply current] —
ESD Protection [DATA_NEEDED: ESD protection rating] [DATA_NEEDED: ESD protection rating]
Statut RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Standard Reel Quantity [DATA_NEEDED: standard reel quantity] —
Tension d'alimentation — 3.3 V
Débit de données — 10 Mbps
Driver Count — 1 driver
Receiver Count — 1 receiver
Driver Feature — Slew-rate-limited driver family feature
Short-Circuit Protection — Short-circuit current limited driver
Arrêt thermique — Driver enters high-impedance state during thermal shutdown
Receiver Feature — Fail-safe receiver input
Channel Direction — 1 transmitter and 1 receiver
Receiver Input Common-Mode Range — [DATA_NEEDED: receiver input common-mode range]
Courant d'alimentation — [DATA_NEEDED: operating and quiescent supply current]
Logic Output Levels — [DATA_NEEDED: logic output voltage levels]
Termination Requirement — [DATA_NEEDED: termination and biasing requirements]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis