MAX3485CSA+T vs MAX3485CSA+ So sánh

So sánh chi tiết song song của MAX3485CSA+T bằng Analog Devices và MAX3485CSA+ bằng Maxim Integrated. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
MAX3485CSA+T MAX3485CSA+T - 3.3V 10Mbps RS-485/422 | Analog Devices

MAX3485CSA+T - 3.3V 10Mbps RS-485/422 | Analog Devices

MAX3485CSA+T ✓ Hoạt động
Maxim Integrated
MAX3485CSA+ MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ Unknown

So sánh thông số kỹ thuật

Tham số MAX3485CSA+T MAX3485CSA+
Thương hiệu Analog Devices Maxim Integrated
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Unknown
Product Type RS-485/RS-422 half-duplex transceiver RS-485/RS-422 transceiver
Supply Voltage Range 3 V to 3.6 V —
Maximum Data Rate 10 Mbps —
Driver Channels 1 —
Receiver Channels 1 —
Duplex Mode Half-duplex Half-duplex
Supported Standards RS-422 and RS-485 RS-485 and RS-422
Hộp 8-pin SOIC (NSOIC-8) 8-SOIC, 0.154 inch, 3.90 mm width
Kiểu lắp đặt Surface mount Surface mount
Driver Edge Rate Slew-rate limited —
Driver Fault Protection Short-circuit current limiting and thermal shutdown —
Receiver Fail-Safe Supported —
Driver Output State During Thermal Shutdown High impedance —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] 0C to +70C
Quiescent Supply Current [DATA_NEEDED: quiescent supply current] —
ESD Protection [DATA_NEEDED: ESD protection rating] [DATA_NEEDED: ESD protection rating]
Trạng thái RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Standard Reel Quantity [DATA_NEEDED: standard reel quantity] —
Điện áp cung cấp — 3.3 V
Tốc độ dữ liệu — 10 Mbps
Driver Count — 1 driver
Receiver Count — 1 receiver
Driver Feature — Slew-rate-limited driver family feature
Short-Circuit Protection — Short-circuit current limited driver
Tắt nhiệt — Driver enters high-impedance state during thermal shutdown
Receiver Feature — Fail-safe receiver input
Channel Direction — 1 transmitter and 1 receiver
Receiver Input Common-Mode Range — [DATA_NEEDED: receiver input common-mode range]
Điện áp cung cấp — [DATA_NEEDED: operating and quiescent supply current]
Logic Output Levels — [DATA_NEEDED: logic output voltage levels]
Termination Requirement — [DATA_NEEDED: termination and biasing requirements]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá