MAX485ECPA+ vs SN75176 Vergleich
Detaillierter Direktvergleich von MAX485ECPA+ von Maxim Integrated und SN75176 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Maxim Integrated
MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim
MAX485ECPA+ ✓ AktivTexas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ AktivSpezifikationsvergleich
| Parameter | MAX485ECPA+ | SN75176 |
|---|---|---|
| Marke | Maxim Integrated | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Transceiver Configuration | 1 driver / 1 receiver, half-duplex | — |
| Interface Standard | RS-485 / RS-422 differential | — |
| Versorgungsspannung | 5 V nominal (4.5 V to 5.5 V) | — |
| Maximum Data Rate | 1 Mbps (slew-rate-limited driver) | — |
| Driver Output Type | Differential, limited slew rate | — |
| ESD Protection | +/-15 kV on driver outputs and receiver inputs | — |
| Gehäuse | PDIP-8 (8-pin plastic DIP, through-hole) | 8-pin PDIP (P) |
| Montageart | Through Hole | Through-Hole |
| Betriebstemperatur | Commercial grade (C suffix) - [DATA_NEEDED: full operating temperature range] | 0 °C to +70 °C |
| Quiescent (Supply) Current | [DATA_NEEDED: quiescent current] | — |
| Receiver Common-Mode Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver differential threshold] | — |
| Driver Output Differential Voltage | [DATA_NEEDED: differential output voltage] | — |
| Driver Output Current | [DATA_NEEDED: output current (standard / high-impedance load)] | ±60 mA (max) |
| Enable Pins | DE (driver enable) and /RE (receiver enable, active-low), separate pins | — |
| Short-Circuit Protection | Yes, driver outputs are short-circuit current limited | — |
| Thermisches Abschalten | Yes, protects against excessive power dissipation | — |
| Quiescent Current Shutdown Pin | Not present on this device | — |
| RoHS-Status | Compliant (Maxim lead-free suffix '+') | Compliant |
| Qualification | Industrial temperature option available in family - [DATA_NEEDED: AEC-Q100 status] | — |
| Funktion | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | 50 mV (typical) |
| Supply Voltage (Vcc) | — | 4.75 V to 5.25 V |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold | — | ±200 mV |
| Quiescent Supply Current (enabled) | — | 30 mA (typical) |
| Shutdown Supply Current | — | 1 µA (typical) |
| Standards Compliance | — | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 |